古城 直道フルシロ ナオミチ |
---|
所属学部・学科等
- システム理工学部 機械工学科
職名 (資格)
- 教授 2020年 4月 1日
取得学位
- 博士(工学) 東京大学
ホームページ・メール
- ホームページアドレス:https://wps.itc.kansai-u.ac.jp/msl/
専門分野
専門分野 | キーワード |
---|---|
生産工学・加工学 | 超精密加工 |
研究課題
現在の研究課題名 | 超精密ダイヤモンド切削における工具摩耗抑制 |
---|---|
研究態様 | 国内共同研究 |
研究期間 | |
研究制度 | |
キーワード | |
研究分野 | |
研究テーマ概要 |
現在の研究課題名 | メカノケミカル超砥粒砥石による電子・光学材料の超仕上 |
---|---|
研究態様 | 国内共同研究 |
研究期間 | |
研究制度 | |
キーワード | |
研究分野 | |
研究テーマ概要 |
現在の研究課題名 | ナノメートルオーダ超微細加工 |
---|---|
研究態様 | 国内共同研究 |
研究期間 | |
研究制度 | |
キーワード | |
研究分野 | |
研究テーマ概要 |
現在の研究課題名 | 逐次精密加工による材料内部情報取得システム |
---|---|
研究態様 | 国内共同研究 |
研究期間 | |
研究制度 | |
キーワード | |
研究分野 | |
研究テーマ概要 |
研究職歴
- 関西大学システム理工学部/助教 2008年4月 1日~2013年3月 31日
- 関西大学システム理工学部/准教授 2013年4月 1日~2020年3月 31日
受賞・学術賞
- ベストプレゼンテーション賞 2005年 3月 18日 (社団法人 精密工学会)
- 論文顕彰 2015年 5月 27日 (公益財団法人 油空圧機器技術振興財団)
- ベストオーガナイザー賞 2017年 3月 15日 (公益社団法人 精密工学会)
- 産学連携賞 2018年 5月 26日 (関西大学科学技術振興会)
- ベストオーガナイザー賞 2019年 3月 15日 (公益社団法人 精密工学会)
所属学会
所属学会・団体名 | 役職名 (役職在任期間) |
---|---|
精密工学会 | 精密工学会誌編集委員(2015年4月 ~2018年3月 ), 精密工学会学術講演会オーガナイズドセッション オーガナイザー(2014年3月 ~2023年3月 ) |
American Society for Precision Engineering | |
日本機械学会 | |
砥粒加工学会 | 砥粒加工学会学術講演会オーガナイズドセッション オーガナイザー(2019年3月 ~2023年3月 ), 砥粒加工学会関西地区部会運営委員(2019年3月 ~2025年3月 ), 砥粒加工学会会誌編集委員(2023年4月 ~2025年3月 ) |
日本フルードパワーシステム学会 | |
ニューダイヤモンドフォーラム |
知的所有権関係
- 切削工具とこれを用いた切削方法
- 特許番号:特表5183256
0
研究業績
No. | 研究業績の種類 | 発表年月日 | 標題 | 出版物の種類 | 共著・単著の別 | 出版社・掲載誌 | 巻・号・頁 |
---|---|---|---|---|---|---|---|
1 | 学会発表7 | 2023年3月 15日~2023年3月 17日2023,03,15,2023,03,17 | 超仕上げにおける砥石弾性を考慮した動的加工モデルの構築―1砥粒モデルの構築― | その他 | 国内共著 | 2022年度関西支部第98期定時総会講演会 | 30910 |
2 | 学会発表7 | 2023年3月 14日~2023年3月 16日2023,03,14,2023,03,16 | 逐次精密切削観察システムを利用した鋼の微小硬さ分布測定(第5報)―加工機上での加工変質層評価の検討― | その他 | 国内共著 | 2023年度精密工学会春季大会学術講演会講演論文集 | pp. 492-493 |
3 | 学会発表7 | 2023年3月 14日~2023年3月 16日2023,03,14,2023,03,16 | サブミクロンオーダ切削の高精度化に関する研究(第4報)―正弦波信号の周期的誤差補正― | その他 | 国内共著 | 2023年度精密工学会春季大会学術講演会講演論文集 | pp. 244-245 |
4 | 学会発表7 | 2023年3月 14日~2023年3月 16日2023,03,14,2023,03,16 | 砥石特性がメカノケミカル砥石による単結晶シリコンの超仕上げ性能に及ぼす影響―砥石表面の硫酸バリウム砥粒,結合剤の観察に基づく工作物除去の評価― | その他 | 国内共著 | 2023年度精密工学会春季大会学術講演会講演論文集 | pp. 162-163 |
5 | 学会発表7 | 2022年12月 20日~2022年12月 21日2022,12,20,2022,12,21 | 材料開発に向けた3次元組織観察・画像処理による数値解析手法の開発 | その他 | 国内共著 | 理研シンポジウム-第10回「光量子工学研究」―ポストコロナ時代の新しい光科学― | |
6 | 国際学会8 | 2022年12月 3日~2022年12月 5日2022,12,03,2022,12,05 | Evaluation of Martensite-Austenite constituent in low-ally steel using advanced microscopy techniques | その他 | 国内共著 | The 4th East-Asia Microscopy Conference (EAMC4) | |
7 | 論文1 | 2022年12月 2022,12,00,,, | メカノケミカル砥石表面のBaSO4砥粒が単結晶シリコンの超仕上げ性能に及ぼす影響 | 学術雑誌 | 国内共著 | 砥粒加工学会誌 | 66 (12), pp. 712-719 |
8 | 学会発表7 | 2022年11月 10日~2022年11月 11日2022,11,10,2022,11,11 | 空気圧シリンダの圧力制御による超仕上げ加工における仕上量の安定化 | その他 | 国内共著 | 2022 年秋季フルードパワーシステム講演会講演論文集 | pp. 106-108 |
9 | 学会発表7 | 2022年9月 7日~2022年9月 9日2022,09,07,2022,09,09 | プラズマ窒化されたステンレス鋼の超精密切削において窒化前の表面処理が及ぼす影響 | その他 | 国内共著 | 2022年度精密工学会秋季大会学術講演会講演論文集 | pp. 359-360 |
10 | 学会発表7 | 2022年8月 29日~2022年8月 31日2022,08,29,2022,08,31 | メカノケミカル砥石を利用した単結晶シリコンの超仕上げ(第4報)―砥石表面の硫酸バリウム砥粒が仕上げ機構に及ぼす影響― | その他 | 国内共著 | 2022年度砥粒加工学会学術講演会講演論文集 | pp. 83-87 |
11 | 学会発表7 | 2022年8月 29日~2022年8月 31日2022,08,29,2022,08,31 | 光学ガラスの表面下損傷の可視化(第4報)―石英ガラスにおける圧痕直下の圧縮応力分布と白濁部の比較― | その他 | 国内共著 | 2022年度砥粒加工学会学術講演会講演論文集 | pp. 275-279 |
12 | 論文1 | 2022年4月 20日2022,04,20,,, | Micro Flow Control Valve with Stable Condition Using Particle-Excitation | 学術雑誌 | 国内共著 | Journal of Robotics and Mechatronics | 34 (2), pp. 422-429 |
13 | 学会発表7 | 2022年3月 15日~2022年3月 17日2022,03,15,2022,03,17 | 窒化された鋼の超精密切削において窒化前の表面処理が及ぼす影響 | その他 | 国内共著 | 2022年度精密工学会春季大会学術講演会講演論文集 | pp. 459-460 |
14 | 学会発表7 | 2021年9月 21日~2021年9月 23日2021,09,21,2021,09,23 | サブミクロンオーダ切削の高精度化に関する研究(第3報)―微小傾斜面加工の周期的誤差補正における切削速度の向上― | その他 | 国内共著 | 2021年度精密工学会秋季大会学術講演会講演論文集 | pp. 523-524 |
15 | 学会発表7 | 2021年9月 1日~2021年9月 3日2021,09,01,2021,09,03 | 光学ガラスの表面下損傷の可視化(第3報)―各種光学ガラスの物性値に基づく応力解析― | その他 | 国内共著 | 2021年度砥粒加工学会学術講演会講演論文集 | pp. 92-97 |
16 | 国際学会8 | 2021年8月 5日~2021年8月 6日2021,08,05,2021,08,06 | Development of a Vibrator to Improve the Efficiency of Particle Excitation Flow Control Valve | その他 | 国内共著 | Abstracts of the 15th International Symposium in Science and Technology 2021 | p. 148 |
17 | 国際学会8 | 2021年8月 5日~2021年8月 6日2021,08,05,2021,08,06 | Proposal of Driving Principle using New Vibration Mode Suitable for Miniaturization of Particle Excitation Flow Control Valve | その他 | 国内共著 | Abstracts of the 15th International Symposium in Science and Technology 2021 | p.157 |
18 | 学会発表7 | 2021年6月 6日~2021年6月 8日2021,06,06,2021,06,08 | メカノケミカル砥石を利用した単結晶シリコンの超仕上げ(第3報)―砥石作業面中の硫酸バリウム砥粒の割合が超仕上げ性能に及ぼす影響― | その他 | 国内共著 | 2021年度砥粒加工学会学術講演会講演論文集 | pp. 78-83 |
19 | 学会発表7 | 2021年5月 26日~2021年5月 28日2021,05,26,2021,05,28 | 微粒子励振型比例制御弁の開発―小型化を目指した新たな振動モードの提案― | その他 | 国内共著 | ロボティクス・メカトロニクス講演会 | 2P2-E12 |
20 | 学会発表7 | 2021年3月 16日~2021年3月 18日2021,03,16,2021,03,18 | 窒化された鋼の超精密切削において窒化前の熱処理が及ぼす影響(第3報)―ミクロ組織が被削性に及ぼす影響― | その他 | 国内共著 | 2021年度精密工学会春季大会学術講演会講演論文集 | pp. 279-280 |
21 | 学会発表7 | 2021年3月 16日~2021年3月 18日2021,03,16,2021,03,18 | サブミクロンオーダ切削の高精度化に関する研究(第2報)―エンコーダ値に基づく周期的誤差の補正― | その他 | 国内共著 | 2021年度精密工学会春季大会学術講演会講演論文集 | pp. 281-282 |
22 | 学会発表7 | 2021年3月 16日~2021年3月 18日2021,03,16,2021,03,18 | 逐次精密切削観察システムを利用した鋼の微小硬さ分布測定(第4報)―加工機上での硬さ分布測定のための駆動方法の提案― | その他 | 国内共著 | 2021年度精密工学会春季大会学術講演会講演論文集 | pp. 438-439 |
23 | 学会発表7 | 2021年3月 16日~2021年3月 18日2021,03,16,2021,03,18 | 微粒子励振型比例制御弁の開発―効率的な駆動条件が実現可能な振動子の設計― | その他 | 国内共著 | 第65回システム制御情報学会研究発表講演会(SCI'21) | OS04-01-1 |
24 | 講演19 | 2020年12月 2日2020,12,02,,, | 精密加工と精密位置決め技術の組み合わせによる材料内部の3次元組織観察,ならびに硬さ分布の3次元解析システム | その他 | 国内共著 | 国際画像機器展2020 国際画像セミナー:特別招待講演<精密加工> | |
25 | 学会発表7 | 2020年3月 17日~2020年3月 19日2020,03,17,2020,03,19 | 逐次精密切削観察システムを利用した鋼の微小硬さ分布測定(第3報)―測定精度向上を目指した駆動条件の検討― | その他 | 国内共著 | 2020年度精密工学会春季大会学術講演会講演論文集 | pp. 268-269 |
26 | 学会発表7 | 2020年3月 17日~2020年3月 19日2020,03,17,2020,03,19 | 圧電振動を利用した流量制御弁における効率的な駆動を目指した振動子の開発 | その他 | 国内共著 | 2020年度精密工学会春季大会学術講演会講演論文集 | pp. 294-295 |
27 | 学会発表7 | 2020年3月 17日~2020年3月 19日2020,03,17,2020,03,19 | 目直し条件がメカノケミカル砥石による単結晶シリコンの超仕上げ性能に及ぼす影響(第2報)―砥石作業面の観察に基づく寿命評価― | その他 | 国内共著 | 2020年度精密工学会春季大会学術講演会講演論文集 | pp. 474-475 |
28 | 学会発表7 | 2019年9月 4日~2019年9月 6日2019,09,04,2019,09,06 | 窒化された鋼のダイヤモンド切削においてミクロ組織が工具摩耗抑制に及ぼす影響 | その他 | 国内共著 | 2019年度精密工学会秋季大会学術講演会講演論文集 | pp. 432-433 |
29 | 学会発表7 | 2019年9月 4日~2019年9月 6日2019,09,04,2019,09,06 | 窒化された鋼の超精密切削において窒化前の熱処理が及ぼす影響(第2報)―工具摩耗機構の熱力学的解析― | その他 | 国内共著 | 2019年度精密工学会秋季大会学術講演会講演論文集 | pp. 430-431 |
30 | 学会発表7 | 2019年8月 28日~2019年8月 30日2019,08,28,2019,08,30 | 銅単結晶(111)の超精密切削機構に関する研究 | その他 | 国内共著 | 2019年度砥粒加工学会学術講演会 | pp. 105-107 |
31 | 論文1 | 2019年8月 2019,08,00,,, | 目直し条件がメカノケミカル砥石による単結晶シリコンの超仕上げ性能に及ぼす影響 | 学術雑誌 | 国内共著 | 砥粒加工学会誌 | 63 (8), pp. 415-420 |
32 | 学会発表7 | 2019年6月 5日~2019年6月 8日2019,06,05,2019,06,08 | 微粒子励振型比例制御弁の開発―開口条件の確認を目指した空圧変化実験― | その他 | 国内共著 | ロボティクス・メカトロニクス講演会 2019講演論文集 | 1P1-K08 |
33 | 論文1 | 2019年4月 2019,04,00,,, | 微粒子励振型流量制御弁におけるねじり振動を利用した駆動原理の有効性評価 | 学術雑誌 | 国内共著 | 日本フルードパワーシステム学会論文集 | 50 (1), pp. 1-8 |
34 | 学会発表7 | 2019年3月 13日~2019年3月 15日2019,03,13,2019,03,15 | ダイヤモンド超砥粒砥石を用いたサファイアの多段超仕上げ(第3報)―砥石の弾性変形を考慮した仕上量推定方法に基づく工程改善― | その他 | 国内共著 | 2019年度精密工学会春季大会学術講演会講演論文集 | pp. 662-663 |
35 | 学会発表7 | 2019年3月 13日~2019年3月 15日2019,03,13,2019,03,15 | 浸炭した鋼のダイヤモンド切削においてミクロ組織が工具摩耗に及ぼす影響(第2報)―浸炭前後の熱処理の影響― | その他 | 国内共著 | 2019年度精密工学会春季大会学術講演会講演論文集 | pp. 660-661 |
36 | 国際学会8 | 2018年11月 4日~2018年11月 8日2018,11,04,2018,11,08 | Improvement of Multistage Superfinishing of Sapphire with Vitrified-bonded Diamond Superabrasive Stones | その他 | 国内共著 | Proceedings of ASPE 2018 Annual Meeting | |
37 | 学会発表7 | 2018年10月 25日~2018年10月 26日2018,10,25,2018,10,26 | 微粒子励振型流量比例制御弁を用いた空気圧シリンダの制御 | その他 | 国内共著 | 平成30年秋季フルードパワーシステム講演会講演論文集 | |
38 | 学会発表7 | 2018年10月 13日~2018年10月 14日2018,10,13,2018,10,14 | 逐次精密切削観察システムを利用した鋼の微小硬さ分布測定(第2報)―機上での微小押込み試験― | その他 | 国内共著 | 第12回生産加工・工作機械部門講演会講演論文集 | |
39 | 論文1 | 2018年10月 2018,10,00,,, | Effect of Microstructure on Mitigating Tool Wear in Diamond Turning of Nitrided Steels | 学術雑誌 | 国内共著 | Precision Engineering | 54, pp. 388-395 |
40 | 国際学会8 | 2018年9月 11日~2018年9月 14日2018,09,11,2018,09,14 | The Method of Improving Flow Characteristics for Air Flow Control Valve Using Particle Excitation by PZT Transducer | その他 | 国内共著 | Proceedings of International Workshop on Piezoelectric Materials and Applications in Actuators (IWPMA2018) | p. 116 |
41 | 国際学会8 | 2018年9月 11日~2018年9月 14日2018,09,11,2018,09,14 | Evaluation of the Effectiveness of Flow Control Valve Utilizing Torsional Vibration by PZT Transducer | その他 | 国内共著 | Proceedings of International Workshop on Piezoelectric Materials and Applications in Actuators (IWPMA2018) | p. 118 |
42 | 学会発表7 | 2018年9月 9日~2018年9月 12日2018,09,09,2018,09,12 | ダイヤモンド超砥粒砥石を用いたサファイアの多段超仕上における粗仕上工程の改善 | その他 | 国内共著 | 日本機械学会2018年度年次大会講演論文集 | S1320104 |
43 | 学会発表7 | 2018年9月 9日~2018年9月 12日2018,09,09,2018,09,12 | ダイヤモンド工具による純鉄切削における工具摩耗現象の解明実験による初期炭素拡散挙動に関する検討 | その他 | 国内共著 | 日本機械学会2018年度年次大会講演論文集 | S1320303 |
44 | 学会発表7 | 2018年8月 29日~2018年8月 31日2018,08,29,2018,08,31 | 光学ガラスの表面下損傷の可視化(第2報)―位置合わせ精度向上および線形補間による改善― | その他 | 国内共著 | 2018年度砥粒加工学会学術講演会講演論文集 | C19 |
45 | 学会発表7 | 2018年8月 29日~2018年8月 31日2018,08,29,2018,08,31 | メカノケミカル砥石を利用した単結晶シリコンの超仕上げ(第2報)―目直し条件が砥石の超仕上げ性能に及ぼす影響― | その他 | 国内共著 | 2018年度砥粒加工学会学術講演会講演論文集 | A09 |
46 | 学会発表7 | 2018年3月 15日~2018年3月 17日2018,03,15,2018,03,17 | 純鉄との接触加熱によるダイヤモンド表面への溝加工―除去量増加のための加工プロセスの検討― | その他 | 国内共著 | 2018年度精密工学会春季大会学術講演会講演論文集 | pp. 31-32 |
47 | 学会発表7 | 2018年3月 15日~2018年3月 17日2018,03,15,2018,03,17 | 単結晶シリコンの超仕上げにおける砥石表面状態の影響 | その他 | 国内共著 | 2018年度精密工学会春季大会学術講演会講演論文集 | pp. 279-280 |
48 | 学会発表7 | 2018年3月 15日~2018年3月 17日2018,03,15,2018,03,17 | 窒化された鋼の超精密切削において窒化前の熱処理が及ぼす影響 | その他 | 国内共著 | 2018年度精密工学会春季大会学術講演会講演論文集 | pp. 359-360 |
49 | 学会発表7 | 2018年3月 10日2018,03,10,,, | 光学ガラスの表面下損傷可視化の高精度化 | その他 | 国内共著 | 日本機械学会 関西学生会2017年度学生員卒業研究発表講演会講演前刷集 | p.11-19 |
50 | 学会発表7 | 2018年3月 10日2018,03,10,,, | 超低熱膨張セラミックスの超仕上 | その他 | 国内共著 | 日本機械学会 関西学生会2017年度学生員卒業研究発表講演会講演前刷集 | p. 11-1 |
51 | 講演19 | 2018年3月 1日2018,03,01,,, | 銅単結晶の超精密切削特性―加工変質層と工具摩耗― | その他 | 単著 | 第60回 マイクロ加工懇談会 (第48回 マイクロ成形研究委員会) | |
52 | 論文1 | 2018年1月 2018,01,00,,, | 光学ガラスの表面下損傷の可視化 | 学術雑誌 | 国内共著 | 砥粒加工学会誌 | 62 (1), pp. 33-38 |
53 | 国際学会8 | 2017年12月 3日~2017年12月 6日2017,12,03,2017,12,06 | Improvement of Removal Amount Estimation Method in Multistage Superfinishing of Sapphire | その他 | 国内共著 | Proceedings of 20th International Symposium on Advances in Abrasive Technology (ISAAT2017) | pp. 153-159 |
54 | 論文1 | 2017年12月 2017,12,00,,, | 鋼のダイヤモンド切削における工具摩耗の抑制 (浸炭した鋼の組織が及ぼす影響) | 学術雑誌 | 国内共著 | 日本機械学会論文集 | 83 (856), p. 17-00161 |
55 | 国際学会8 | 2017年11月 13日~2017年11月 17日2017,11,13,2017,11,17 | Influence of Crystal Anisotropy on Ultra-precision Cutting of Single Crystal Copper (111) Surface | その他 | 国内共著 | Proceedings of 9th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) | C14 (091) |
56 | 国際学会8 | 2017年11月 13日~2017年11月 17日2017,11,13,2017,11,17 | Study on Factors of Tool Wear in Diamond Turning of Carburized Steel using Decision Trees | その他 | 国内共著 | Proceedings of 9th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) | C15 (092) |
57 | 論文1 | 2017年11月 2017,11,00,,, | Three-dimensional Observation of Microstructure of Bone Tissue Using High-precision Machining | 学術雑誌 | 国内共著 | International Journal of Automation Technology | 11 (6), pp. 883-894 |
58 | 論文1 | 2017年10月 2017,10,00,,, | 銅単結晶の超精密切削におけるシュミット因子の影響 | 学術雑誌 | 国内共著 | 精密工学会誌 | 83 (10), pp. 967-971 |
59 | 論文1 | 2017年10月 2017,10,00,,, | Optimization of Orifice Position in Particle-exciation Valve for Proportional Flow Control | 学術雑誌 | 国内共著 | ROBOMECH Journal | 4 (25), pp. 1-11 |
60 | 学会発表7 | 2017年9月 20日~2017年9月 22日2017,09,20,2017,09,22 | ダイヤモンド切削における工具摩耗の抑制―窒化された鋼の組織が及ぼす影響― | その他 | 国内共著 | 2017年度精密工学会秋季大会学術講演会講演論文集 | pp. 77-78 |
61 | 学会発表7 | 2017年9月 20日~2017年9月 22日2017,09,20,2017,09,22 | 逐次精密切削観察システムを利用した鋼の微小硬さ分布測定 | その他 | 国内共著 | 2017年度精密工学会秋季大会学術講演会講演論文集 | pp. 79-80 |
62 | 学会発表7 | 2017年9月 20日~2017年9月 22日2017,09,20,2017,09,22 | 純鉄との接触加熱によるダイヤモンド表面への溝加工―加工特性と加熱条件との関係― | その他 | 国内共著 | 2017年度精密工学会秋季大会学術講演会講演論文集 | pp. 653-654 |
63 | 学会発表7 | 2017年9月 20日~2017年9月 22日2017,09,20,2017,09,22 | 微粒子励振型空気流量比例制御弁の流量特性の改善方法の考案―第4報 制御領域の拡大を目指した微粒子による開口条件の調節― | その他 | 国内共著 | 2017年度精密工学会秋季大会学術講演会講演論文集 | pp. 733-734 |
64 | 学会発表7 | 2017年9月 20日~2017年9月 22日2017,09,20,2017,09,22 | ねじり振動を利用した流量制御弁の開発―オリフィスの開口条件の検討― | その他 | 国内共著 | 2017年度精密工学会秋季大会学術講演会講演論文集 | pp. 751-752 |
65 | 講演19 | 2017年9月 7日2017,09,07,,, | 表面改質・熱処理による鋼のダイヤモンド切削における被削性向上 | その他 | 単著 | 平成29年度中部大学 生産技術開発センター講演会 | |
66 | 論文1 | 2017年9月 2017,09,00,,, | Development of Removal Amount Estimation Method based on Calculation of Elastic Deformation of Superabrasive Stones during Multistage Superfinishing of Sapphire | 学術雑誌 | 国内共著 | International Journal of Automation Technology | 11 (5), pp. 742-753 |
67 | 学会発表7 | 2017年8月 30日~2017年9月 1日2017,08,30,2017,09,01 | 光学ガラスの表面下損傷の可視化 | その他 | 国内共著 | 2017年度砥粒加工学会学術講演会講演論文集 | pp. 171-176 |
68 | 学会発表7 | 2017年8月 30日~2017年9月 1日2017,08,30,2017,09,01 | メカノケミカル砥石を利用した単結晶シリコンの超仕上げ―目直しが及ぼす影響― | その他 | 国内共著 | 2017年度砥粒加工学会学術講演会講演論文集 | pp. 303-305 |
69 | 論文1 | 2017年8月 2017,08,00,,, | ニッケルおよび無電解ニッケルの超精密切削加工におけるダイヤモンド工具の損耗機構 | 学術雑誌 | 国内共著 | 精密工学会誌 | 83 (8), pp. 762-769 |
70 | 国際学会8 | 2017年5月 29日~2017年6月 2日2017,05,29,2017,06,02 | Nitrides in Nitriding Steels Diminish Diffusion Wear in Diamond Turning | その他 | 国内共著 | Proceedings of 17th euspen International Conference | pp. 203-204 |
71 | 学会発表7 | 2017年5月 11日~2017年5月 13日2017,05,11,2017,05,13 | 微粒子励振型比例制御弁の開発―流量特性の安定を目指したオリフィス条件の改良― | その他 | 国内共著 | 日本機械学会ロボティクス・メカトロニクス講演会 2017 | 2A1-B02 |
72 | 学会発表7 | 2017年3月 13日~2017年3月 15日2017,03,13,2017,03,15 | 銅単結晶の超精密切削におけるシュミット因子の影響 | その他 | 国内共著 | 2017年度精密工学会春季大会学術講演会講演論文集 | pp. 643-644 |
73 | 学会発表7 | 2017年3月 13日~2017年3月 15日2017,03,13,2017,03,15 | 浸炭した鋼のダイヤモンド切削においてミクロ組織が工具摩耗に及ぼす影響 | その他 | 国内共著 | 2017年度精密工学会春季大会学術講演会講演論文集 | pp. 645-646 |
74 | 学会発表7 | 2017年3月 13日~2017年3月 15日2017,03,13,2017,03,15 | 微粒子励振型空気流量比例制御弁の流量特性の改善方法の考案―第3報 応答性の改善を目指した新たな駆動方法の提案― | その他 | 国内共著 | 2017年度精密工学会春季大会学術講演会講演論文集 | pp. 155-156 |
75 | 論文1 | 2017年1月 2017,01,00,,, | Particle-Excitation Flow-Control Valve using Piezo Vibration-Improvement for a High Flow Rate and Research on Controllability | 学術雑誌 | 国内共著 | 電気学会論文誌E(センサ・マイクロマシン部門誌) | 137 (1), pp. 32-37 |
76 | 国際学会8 | 2016年10月 23日~2016年10月 28日2016,10,23,2016,10,28 | Multistage Superfinishing of Sapphire with Vitrified-bonded Diamond Superabrasive Stones | その他 | 国内共著 | Proceedings of ASPE 2016 Annual Meeting | pp. 478-482 |
77 | 学会発表7 | 2016年10月 22日~2016年10月 23日2016,10,22,2016,10,23 | 鋼のダイヤモンド切削における工具摩耗の抑制―浸炭した鋼の組織が及ぼす影響― | その他 | 国内共著 | 第11回生産加工・工作機械部門講演会講演論文集 | pp. 115-116 |
78 | 国際学会8 | 2016年9月 18日~2016年9月 21日2016,09,18,2016,09,21 | Highly Responsive and Stable Flow Control Valve using a PZT Transducer | その他 | 国内共著 | Proceedings of 2016 IEEE International Ultrasonics Symposium (IUS 2016) | pp. 399-400 |
79 | 学会発表7 | 2016年9月 11日~2016年9月 14日2016,09,11,2016,09,14 | 銅単結晶の超精密切削における加工変質層 | その他 | 国内共著 | 日本機械学会2016年度年次大会講演論文集 | S1310304 |
80 | 論文1 | 2016年7月 2016,07,00,,, | Development of Novel Particle Excitation Flow Control Valve for Stable Flow Characteristics | 学術雑誌 | 国内共著 | International Journal of Automation Technology | 10 (4), pp. 540-548 |
81 | 国際学会8 | 2016年6月 13日~2016年6月 15日2016,06,13,2016,06,15 | High Response Proportional Flow Control Valve using Particle Excitation | その他 | 国内共著 | Proceedings of 15th International Conference on New Actuators (ACTUATOR 16) | pp. 241-244 |
82 | 学会発表7 | 2016年3月 15日~2016年3月 17日2016,03,15,2016,03,17 | 微粒子励振型空気流量比例制御弁の流量特性の改善方法の考案 第2報 安定流量域の拡大 | その他 | 国内共著 | 2016年度精密工学会春季大会学術講演会講演論文集 | pp. 387-388 |
83 | 学会発表7 | 2016年3月 15日~2016年3月 17日2016,03,15,2016,03,17 | ダイヤモンド超砥粒砥石を用いたサファイアの多段超仕上げ(第2報)―加工中の弾性変形を考慮した真実接触圧力と仕上げ量の関係― | その他 | 国内共著 | 2016年度精密工学会春季大会学術講演会講演論文集 | pp. 233-234 |
84 | 国際学会8 | 2015年10月 21日~2015年10月 24日2015,10,21,2015,10,24 | Small Size Pneumatic Valve for Smooth Flow Control using PZT Vibrator | その他 | 国内共著 | Proceedings of 2015 IEEE International Ultrasonics Symposium (IUS 2015) | p. 275 |
85 | 学会発表7 | 2015年9月 4日~2015年9月 6日2015,09,04,2015,09,06 | ダイヤモンド切削における工具摩耗を抑制する窒化した鋼の分析 | その他 | 国内共著 | 2015年度精密工学会秋季大会学術講演会講演論文集 | pp. 215-216 |
86 | 学会発表7 | 2015年9月 4日~2015年9月 6日2015,09,04,2015,09,06 | 分子動力学法を用いた純鉄中への炭素拡散接触モデルの構築-荷重と移動速度の付与による検討- | その他 | 国内共著 | 2015年度精密工学会秋季大会学術講演会講演論文集 | pp. 227-228 |
87 | 学会発表7 | 2015年9月 4日~2015年9月 6日2015,09,04,2015,09,06 | 酸化セリウム砥石を用いた光学ガラスの精密仕上げ-ガラス仕上げ量のサブミクロンオーダ測定- | その他 | 国内共著 | 2015年度精密工学会秋季大会学術講演会講演論文集 | pp. 485-486 |
88 | 学会発表7 | 2015年9月 4日~2015年9月 6日2015,09,04,2015,09,06 | 微粒子励振型空気流量比例制御弁の流量特性の改善方法の考案 | その他 | 国内共著 | 2015年度精密工学会秋季大会学術講演会講演論文集 | pp. 883-884 |
89 | 国際学会8 | 2015年4月 22日~2015年4月 25日2015,04,22,2015,04,25 | Research on Controllability of the Particle Excitation Flow Control Valve | その他 | 国内共著 | Proceedings of the 6th International Conference on Manufacturing, Machine Design and Tribology (ICMDT2015) | pp. 136-137 |
90 | 学会発表7 | 2015年3月 17日~2015年3月 19日2015,03,17,2015,03,19 | 浸炭した鋼のダイヤモンド切削において炭化物が工具摩耗抑制に及ぼす影響 | その他 | 国内共著 | 2015年度精密工学会春季大会学術講演会講演論文集 | pp. 301-302 |
91 | 学会発表7 | 2015年3月 17日~2015年3月 19日2015,03,17,2015,03,19 | サブミクロンオーダ切削の高精度化に関する研究 | その他 | 国内共著 | 2015年度精密工学会春季大会学術講演会講演論文集 | pp. 303-304 |
92 | 学会発表7 | 2015年3月 17日~2015年3月 19日2015,03,17,2015,03,19 | ダイヤモンド超砥粒砥石を用いたサファイアの多段超仕上げ | その他 | 国内共著 | 2015年度精密工学会春季大会学術講演会講演論文集 | pp. 1017-1018 |
93 | 論文1 | 2015年3月 2015,03,00,,, | 微粒子励振型流量制御弁を用いた空気圧シリンダの速度制御 | 学術雑誌 | 国内共著 | 日本フルードパワーシステム学会論文集 | 46 (2), pp. 7-13 |
94 | 国際学会8 | 2014年11月 9日~2014年11月 14日2014,11,09,2014,11,14 | Suppression of Tool Wear in Turning of Steels by Surface Modification – Effect of Nitriding – | その他 | 国内共著 | Proceedings of ASPE 2014 Annual Meeting | pp. 555-558 |
95 | 国際学会8 | 2014年6月 2日~2014年6月 6日2014,06,02,2014,06,06 | Superfinishing Characteristics of Single Crystal Silicon with Mechanochemical Superabrasive Stone Containing BaSO4 Abrasive | その他 | 国内共著 | Proceedings of 14th euspen International Conference | pp. 194-197 |
96 | 学会発表7 | 2014年3月 18日~2014年3月 20日2014,03,18,2014,03,20 | メカノケミカル複合超砥粒砥石の5因子がサファイアの超仕上性能に及ぼす影響 | その他 | 国内共著 | 2014年度精密工学会春季大会学術講演会講演論文集 | pp. 645-646 |
97 | 学会発表7 | 2014年3月 18日~2014年3月 20日2014,03,18,2014,03,20 | 表面改質した鋼のダイヤモンド切削における工具摩耗抑制(第4報)―窒化したステンレス鋼における摩耗特性- | その他 | 国内共著 | 2014年度精密工学会春季大会学術講演会講演論文集 | pp. 1227-1228 |
98 | 国際学会8 | 2013年10月 20日~2013年10月 25日2013,10,20,2013,10,25 | Suppression of Tool Wear in Diamond Turning by Surface Modification of Steels - Effect of Carbides in Carburized Steels - | その他 | 国内共著 | Proceedings of ASPE 2013 Annual Meeting | pp. 385-388 |
99 | 論文1 | 2013年7月 2013,07,00,,, | セリアを含むメカノケミカル超砥粒砥石の作業面トポグラフィのモデリング | 学術雑誌 | 国内共著 | 砥粒加工学会誌 | 57 (7), pp. 453-458 |
100 | 学会発表7 | 2013年3月 16日~2013年3月 17日2013,03,16,2013,03,17 | 分子動力学法を用いた鉄―炭素バルク間における炭素拡散挙動解析― | その他 | 国内共著 | 機械学会関西支部第88期講演会講演論文集 | |
101 | 学会発表7 | 2013年3月 13日~2013年3月 15日2013,03,13,2013,03,15 | メカノケミカル複合超砥粒砥石によるサファイアの超仕上性能 | その他 | 国内共著 | 2013年度精密工学会春季大会学術講演会講演論文集 | pp. 967-968 |
102 | 学会発表7 | 2013年3月 13日~2013年3月 15日2013,03,13,2013,03,15 | 硫酸バリウム砥粒砥石による単結晶シリコンの超仕上性能 | その他 | 国内共著 | 2013年度精密工学会春季大会学術講演会講演論文集 | pp. 961-962 |
103 | 学会発表7 | 2013年3月 13日~2013年3月 15日2013,03,13,2013,03,15 | 銅単結晶におけるサブミクロンオーダ切削の高精度化に関する研究―超精密切削特性に及ぼす結晶異方性の影響― | その他 | 国内共著 | 2013年度精密工学会春季大会学術講演会講演論文集 | pp. 219-220 |
104 | 学会発表7 | 2013年3月 13日~2013年3月 15日2013,03,13,2013,03,15 | 表面改質した鋼のダイヤモンド切削における工具摩耗抑制(第3報)―浸炭鋼において炭化物が及ぼす影響̶ | その他 | 国内共著 | 2013年度精密工学会春季大会学術講演会講演論文集 | pp. 217-218 |
105 | 国際学会8 | 2012年10月 21日~2012年10月 26日2012,10,21,2012,10,26 | Superfinishing Performance of Bearing Steel with CeO2 Superabrasive Stone | その他 | 国内共著 | Proceedings of ASPE 2012 Annual Meeting | pp. 308-311 |
106 | 学会発表7 | 2012年3月 14日~2012年3月 16日2012,03,14,2012,03,16 | セリア含有メカノケミカル砥石による軸受鋼の超仕上性能 | その他 | 国内共著 | 2012年度精密工学会春季大会学術講演会講演論文集 | pp. 307-308 |
107 | 論文1 | 2011年12月 2011,12,00,,, | ダイヤモンド工具の摩耗に及ぼす鋼材組織の影響 | 学術雑誌 | 国内共著 | 鉄と鋼 | 97 (12), pp. 631-636 |
108 | 国際学会8 | 2011年11月 13日~2011年11月 18日2011,11,13,2011,11,18 | Suppression of Tool Weaer in Diamond Turning of Steels by Surface Modification - Effect of Carburizing - | その他 | 国内共著 | Proceedings of ASPE 2011 Annual Meeting | pp. 345-348 |
109 | 学会発表7 | 2011年9月 20日~2011年9月 22日2011,09,20,2011,09,22 | 浸炭および窒化された鋼のダイヤモンド切削における工具摩耗抑制 | その他 | 国内共著 | 2011年度精密工学会秋季大会学術講演会講演論文集 | pp. 67-68 |
110 | 学会発表7 | 2011年9月 20日~2011年9月 22日2011,09,20,2011,09,22 | 硫酸バリウム含有メカノケミカル複合超砥粒砥石による単結晶シリコンの超仕上性能 | その他 | 国内共著 | 2011年度精密工学会秋季大会学術講演会講演論文集 | pp. 761-762 |
111 | 論文1 | 2011年4月 2011,04,00,,, | Three-Dimensional Microscopic Elemental Analysis Using an Automated High-Precision Serial Sectioning System | 学術雑誌 | 国内共著 | Microscopy and Microanalysis | 17 (2), pp. 246-251 |
112 | 学会発表7 | 2011年3月 14日~2011年3月 16日2011,03,14,2011,03,16 | 硫酸バリウム砥粒を含むメカノケミカル超砥粒砥石による単結晶シリコンの超仕上特性 | その他 | 国内共著 | 2011年度精密工学会春季大会学術講演会講演論文集 | pp. 289-290 |
113 | 学会発表7 | 2011年3月 14日~2011年3月 16日2011,03,14,2011,03,16 | 表面改質した鋼のダイヤモンド切削における工具摩耗抑制-浸炭の効果- | その他 | 国内共著 | 2011年度精密工学会春季大会学術講演会講演論文集 | pp. 857-858 |
114 | 学会発表7 | 2011年3月 14日~2011年3月 16日2011,03,14,2011,03,16 | 鉄系金属の超精密切削加工における工具損耗の抑制 | その他 | 国内共著 | 2011年度精密工学会春季大会学術講演会講演論文集 | pp. 53-54 |
115 | 学会発表7 | 2011年3月 14日~2011年3月 16日2011,03,14,2011,03,16 | マイクロ多刃工具の加工特性における成膜材の影響 | その他 | 国内共著 | 2011年度精密工学会春季大会学術講演会講演論文集 | pp. 223-224 |
116 | 国際学会8 | 2010年10月 31日~2010年11月 4日2010,10,31,2010,11,04 | Tool Wear in Diamond Turning of Steels | その他 | 国内共著 | Proceedings of ASPE 2010 Annual Meeting | pp. 431-434 |
117 | 学会発表7 | 2010年9月 27日~2010年9月 29日2010,09,27,2010,09,29 | Niの加工におけるダイヤモンド工具の損耗機構 | その他 | 国内共著 | 2010年度精密工学会秋季大会学術講演会講演論文集 | pp. 115-116 |
118 | 論文1 | 2010年9月 2010,09,00,,, | セリアを含むメカノケミカル超砥粒砥石の構造モデルの構築 | 学術雑誌 | 国内共著 | 砥粒加工学会誌 | 54 (9), pp. 557-561 |
119 | 学会発表7 | 2010年8月 26日~2010年8月 28日2010,08,26,2010,08,28 | 軸受鋼の超仕上におけるメカノケミカル砥石の材料除去機構 | その他 | 国内共著 | 2010年度砥粒加工学会学術講演会講演論文集 | pp. 275-276 |
120 | 国際学会8 | 2010年8月 22日~2010年8月 28日2010,08,22,2010,08,28 | Suppression Mechanism of Tool Wear by Phosphorous Addition in Diamond Turning of Electroless Nickel Deposits | その他 | 国内共著 | 60th CIRP General Assembly | |
121 | 論文1 | 2010年7月 2010,07,00,,, | Development of Mechanochemical Diamond Stone containing BaSO4 Abrasive | 学術雑誌 | 国内共著 | Precision Engineering | 34 (3), pp. 419-424 |
122 | 論文1 | 2010年7月 2010,07,00,,, | Suppression Mechanism of Tool Wear by Phosphorous Addition in Diamond Turning of Electroless Nickel Deposits | 学術雑誌 | 国内共著 | CIRP Annals – Manufacturing Technology | 59 (1), pp. 105-108 |
123 | 学会発表7 | 2010年5月 28日2010,05,28,,, | アレイ型マイクロ多刃工具のガラス加工への適用 | その他 | 国内共著 | 精密工学会2010年度関西地方定期学術講演会講演論文集 | pp. 56-57 |
124 | 講演19 | 2010年4月 8日~2010年4月 9日2010,04,08,2010,04,09 | メカノケミカル超砥粒砥石による鋼の超仕上 | その他 | 国内共著 | 第11回高エネ研メカ・ワークショプ 第2回先端加速器・機械工学・超伝導低温技術研究会報告集 | pp. 296-307 |
125 | 論文1 | 2010年4月 2010,04,00,,, | 炭素拡散に基づくダイヤモンド工具の熱化学研磨 | 学術雑誌 | 国内共著 | 日本機械学会論文集 C編 | 76 (764) C, pp. 974-980 |
126 | 学会発表7 | 2010年3月 16日~2010年3月 18日2010,03,16,2010,03,18 | 超精密切削用ダイヤモンド工具の損耗特性に対する窒素不純物の影響 | その他 | 国内共著 | 2010年度精密工学会春季大会学術講演会講演論文集 | pp. 433-434 |
127 | 学会発表7 | 2010年3月 16日~2010年3月 18日2010,03,16,2010,03,18 | 単結晶ダイヤモンドのクラック伸展挙動に対する分子動力学解析 | その他 | 国内共著 | 2010年度精密工学会春季大会学術講演会講演論文集 | pp. 435-436 |
128 | 学会発表7 | 2010年3月 16日~2010年3月 18日2010,03,16,2010,03,18 | 鋼のダイヤモンド切削における工具摩耗 | その他 | 国内共著 | 2010年度精密工学会春季大会学術講演会講演論文集 | pp. 17-18 |
129 | 論文1 | 2010年3月 2010,03,00,,, | 鋼の超仕上におけるダイヤモンド砥石の摩耗抑制 | 学術雑誌 | 国内共著 | 日本機械学会論文集 C編 | 76 (763) C, pp. 777-783 |
130 | 学会発表7 | 2010年1月 28日~2010年1月 29日2010,01,28,2010,01,29 | 成膜材の違いによるマイクロ多刃工具の加工特性 | その他 | 国内共著 | 第14回関西大学先端科学技術シンポジウム | pp. 261-262 |
131 | 国際学会8 | 2009年10月 4日~2009年10月 9日2009,10,04,2009,10,09 | Mechanochemical Superfinishing of Optical Glass – Scratchless Surface Finishing Process – | その他 | 国内共著 | Proceedings of ASPE 2009 Annual Meeting | pp. 323-326 |
132 | 国際学会8 | 2009年10月 4日~2009年10月 9日2009,10,04,2009,10,09 | 3D Structure and Surface Topography Models of the Mechano-chemical Composite Grinding Wheel by Fractal Modeling Technique | その他 | 国内共著 | Proceedings of ASPE 2009 Annual Meeting | pp. 343-346 |
133 | 論文1 | 2009年10月 2009,10,00,,, | Polishing of Single Point Diamond Tool based on Thermo-Chemical Reaction with Copper | 学術雑誌 | 国内共著 | Precision Engineering | 33 (4), pp. 486-491 |
134 | 学会発表7 | 2009年9月 10日~2009年9月 12日2009,09,10,2009,09,12 | 鋼の超仕上におけるダイヤモンド砥石の摩耗抑制の試み | その他 | 国内共著 | 2009年度精密工学会秋季大会学術講演会講演論文集 | pp. 333-334 |
135 | 学会発表7 | 2009年9月 10日~2009年9月 12日2009,09,10,2009,09,12 | ダイヤモンド工具の摩耗メカニズムと摩耗形態 | その他 | 国内共著 | 2009年度精密工学会秋季大会学術講演会講演論文集 | pp. 61-62 |
136 | 論文1 | 2009年9月 2009,09,00,,, | 組立用アクティブ・フレキシブル治具の開発(第2報)―平面対応型アクティブ・フレキシブル治具を用いた組立作業― | 学術雑誌 | 国内共著 | 精密工学会誌 | 75 (9), pp. 1134-1138 |
137 | 論文1 | 2009年8月 2009,08,00,,, | セリアを含むメカノケミカル超砥粒砥石の超仕上特性 | 学術雑誌 | 国内共著 | 砥粒加工学会誌 | 53 (8), pp. 499-503 |
138 | 論文1 | 2009年8月 2009,08,00,,, | Development of Ultra-Fine-Grain Binderless cBN Tool for Precision Cutting of Ferrous Materials | 学術雑誌 | 国内共著 | Journal of Materials Processing Technology | 209 (15-16), pp. 5646-5652 |
139 | 講演19 | 2009年5月 18日2009,05,18,,, | メカノケミカル砥石による光学ガラスの超仕上げ | その他 | 単著 | メカトロニクス基礎研究施設講演会-大型光学部品の超精密加工- | |
140 | 学会発表7 | 2009年3月 13日2009,03,13,,, | コーティングしたマイクロ多刃工具によるガラスの微小切削 | その他 | 国内共著 | 精密工学会2009年度関西地方定期学術講演会講演論文集 | pp. 39-40 |
141 | 学会発表7 | 2009年3月 11日~2009年3月 13日2009,03,11,2009,03,13 | 酸化セリウム砥石による光学ガラスの超仕上 | その他 | 国内共著 | 2009年度精密工学会春季大会学術講演会講演論文集 | pp. 233-234 |
142 | 学会発表7 | 2009年3月 11日~2009年3月 13日2009,03,11,2009,03,13 | 窒化された鋼のダイヤモンド切削における工具損耗 | その他 | 国内共著 | 2009年度精密工学会春季大会学術講演会講演論文集 | pp. 251-252 |
143 | 学会発表7 | 2009年3月 11日~2009年3月 13日2009,03,11,2009,03,13 | 分子動力学法による単結晶ダイヤモンド工具の強度の解析 | その他 | 国内共著 | 2009年度精密工学会春季大会学術講演会講演論文集 | pp. 337-338 |
144 | 学会発表7 | 2009年1月 15日~2009年1月 16日2009,01,15,2009,01,16 | マイクロ加工機械用工具の性能評価 | その他 | 国内共著 | 第13回関西大学先端科学技術シンポジウム | pp. 221-222 |
145 | 論文1 | 2009年1月 2009,01,00,,, | Development of Superabrasive Stone for Mechanochemical Superfinishing | 学術雑誌 | 国内共著 | Precision Engineering | 33 (1), pp. 65-70 |
146 | 講演19 | 2008年12月 18日2008,12,18,,, | 精密切削加工を利用した硬組織対応型3次元内部構造顕微鏡の開発 | その他 | 国内共著 | 理研シンポジウム-生体形状情報の数値化及びデータベース構築研究- | pp. 12-16 |
147 | 講演19 | 2008年12月 18日2008,12,18,,, | 元素分析型3次元内部構造顕微鏡の開発 | その他 | 国内共著 | 理研シンポジウム-生体形状情報の数値化及びデータベース構築研究- | pp. 17-20 |
148 | 国際学会8 | 2008年10月 19日~2008年10月 24日2008,10,19,2008,10,24 | Three-dimensional Internal Information Acquisition System based on Consecutive Precision Machining and Cross-sectional Observation – Development of the system and its Application – | その他 | 国内共著 | Proceedings of ASPE 2008 Annual Meeting | pp. 180-183 |
149 | 国際学会8 | 2008年10月 19日~2008年10月 24日2008,10,19,2008,10,24 | Mechanochemical Diamond Stone Containing BaSO4 Abrasive | その他 | 国内共著 | Proceedings of ASPE 2008 Annual Meeting | pp. 392-395 |
150 | 学会発表7 | 2008年9月 17日~2008年9月 19日2008,09,17,2008,09,19 | 合成ダイヤモンド工具の耐摩耗性の評価 | その他 | 国内共著 | 2008年度精密工学会秋季大会学術講演会講演論文集 | pp. 45-46 |
151 | 学会発表7 | 2008年9月 17日~2008年9月 19日2008,09,17,2008,09,19 | 単結晶ダイヤモンド切削工具の損耗機構 | その他 | 国内共著 | 2008年度精密工学会秋季大会学術講演会講演論文集 | pp. 801-802 |
152 | 学会発表7 | 2008年9月 3日~2008年9月 5日2008,09,03,2008,09,05 | ダイヤモンド超砥粒砥石によるガラスの超仕上げに対する特性評価 | その他 | 国内共著 | 2008年度砥粒加工学会学術講演会講演論文集 | pp. 15-20 |
153 | 論文1 | 2008年9月 2008,09,00,,, | 試料内部3次元情報取得システムによるアルミニウム合金ダイカスト内部の鋳巣観察 | 学術雑誌 | 国内共著 | 精密工学会誌 | 74 (9), pp. 991-996 |
154 | 学会発表7 | 2008年7月 29日~2008年7月 30日2008,07,29,2008,07,30 | Taをコーティングしたマイクロ多刃工具によるガラスの湿式加工 | その他 | 国内共著 | 精密工学会2008年度関西地方定期学術講演会講演論文集 | pp. 45-46 |
155 | 論文1 | 2008年6月 2008,06,00,,, | 逐次精密切削加工による試料内部3次元情報取得システムの開発 | 学術雑誌 | 国内共著 | 精密工学会誌 | 74 (6), pp. 587-592 |
学会発表超仕上げにおける砥石弾性を考慮した動的加工モデルの構築―1砥粒モデルの構築―査読無その他国内共著谷村 拓紀;山口 智実;古城 直道;廣岡 大祐2022年度関西支部第98期定時総会講演会309102023年3月 15日~2023年3月 17日2022年度関西支部第98期定時総会講演会京都工芸繊維大学
学会発表逐次精密切削観察システムを利用した鋼の微小硬さ分布測定(第5報)―加工機上での加工変質層評価の検討―査読無その他国内共著平山 泰誠;廣岡 大祐;古城 直道;山口 智実;横田 秀夫;山下 典理男2023年度精密工学会春季大会学術講演会講演論文集pp. 492-4932023年3月 14日~2023年3月 16日2023年度精密工学会春季大会学術講演会東京理科大学
学会発表サブミクロンオーダ切削の高精度化に関する研究(第4報)―正弦波信号の周期的誤差補正―査読無その他国内共著井内 優輔;古城 直道;山口 智実;廣岡 大祐2023年度精密工学会春季大会学術講演会講演論文集pp. 244-2452023年3月 14日~2023年3月 16日2023年度精密工学会春季大会学術講演会東京理科大学
学会発表砥石特性がメカノケミカル砥石による単結晶シリコンの超仕上げ性能に及ぼす影響―砥石表面の硫酸バリウム砥粒,結合剤の観察に基づく工作物除去の評価―査読無その他国内共著池田 真遥;古城 直道;山口 智実;廣岡 大祐;角田 勝俊;棚田 憲一2023年度精密工学会春季大会学術講演会講演論文集 pp. 162-1632023年3月 14日~2023年3月 16日2023年度精密工学会春季大会学術講演会東京理科大学
学会発表材料開発に向けた3次元組織観察・画像処理による数値解析手法の開発査読無その他国内共著横田 秀夫;山下 典理男;道川 隆士;吉澤 信;森田 正彦;原 徹;古城 直道;廣岡 大祐;井元 雅弘;岡崎 喜臣理研シンポジウム-第10回「光量子工学研究」―ポストコロナ時代の新しい光科学―2022年12月 20日~2022年12月 21日理研シンポジウム-第10回「光量子工学研究」―ポストコロナ時代の新しい光科学―理化学研究所
国際学会Evaluation of Martensite-Austenite constituent in low-ally steel using advanced microscopy techniques査読無その他国内共著Toru HARA;Masahiro INOMOTO;Yoshiomi OKAZAKI;Kaoru MURATA;Naomichi FURUSHIRO;Hideo YOKOTAThe 4th East-Asia Microscopy Conference (EAMC4)2022年12月 3日~2022年12月 5日The 4th East-Asia Microscopy Conference (EAMC4)オンライン
論文メカノケミカル砥石表面のBaSO4砥粒が単結晶シリコンの超仕上げ性能に及ぼす影響査読有学術雑誌国内共著池田 真遥;古城 直道;山口 智実;廣岡 大祐;角田 勝俊;棚田 憲一砥粒加工学会誌66 (12), pp. 712-7192022年12月 10.11420/jsat.66.712
学会発表空気圧シリンダの圧力制御による超仕上げ加工における仕上量の安定化査読無その他国内共著細川 翼平;古城 直道;廣岡 大祐;山口 智実2022 年秋季フルードパワーシステム講演会講演論文集pp. 106-1082022年11月 10日~2022年11月 11日2022 年秋季フルードパワーシステム講演会海峡メッセ下関
学会発表プラズマ窒化されたステンレス鋼の超精密切削において窒化前の表面処理が及ぼす影響査読無その他国内共著安原 佑;古城 直道;山口 智実;廣岡 大祐2022年度精密工学会秋季大会学術講演会講演論文集pp. 359-3602022年9月 7日~2022年9月 9日2022年度精密工学会秋季大会学術講演会オンライン
学会発表メカノケミカル砥石を利用した単結晶シリコンの超仕上げ(第4報)―砥石表面の硫酸バリウム砥粒が仕上げ機構に及ぼす影響―査読無その他国内共著池田 真遥;古城 直道;山口 智実;廣岡 大祐;角田 勝俊;棚田 憲一2022年度砥粒加工学会学術講演会講演論文集pp. 83-872022年8月 29日~2022年8月 31日2022年度砥粒加工学会学術講演会神奈川大学
学会発表光学ガラスの表面下損傷の可視化(第4報)―石英ガラスにおける圧痕直下の圧縮応力分布と白濁部の比較―査読無その他国内共著北村 駿弥;遠藤 大暉;古城 直道;山口 智実;廣岡 大祐;角田 勝俊;棚田 憲一2022年度砥粒加工学会学術講演会講演論文集pp. 275-2792022年8月 29日~2022年8月 31日2022年度砥粒加工学会学術講演会神奈川大学
論文Micro Flow Control Valve with Stable Condition Using Particle-Excitation査読有学術雑誌国内共著Daisuke HIROOKA;Naomichi FURUSHIRO;Tomomi YAMAGUCHIJournal of Robotics and Mechatronics34 (2), pp. 422-4292022年4月 20日10.20965/jrm.2022.p0422
学会発表窒化された鋼の超精密切削において窒化前の表面処理が及ぼす影響査読無その他国内共著安原 佑;古城 直道;山口 智実;廣岡 大祐2022年度精密工学会春季大会学術講演会講演論文集pp. 459-4602022年3月 15日~2022年3月 17日2022年度精密工学会春季大会学術講演会オンライン
学会発表サブミクロンオーダ切削の高精度化に関する研究(第3報)―微小傾斜面加工の周期的誤差補正における切削速度の向上―査読無その他国内共著井内 優輔;古城 直道;山口 智実;廣岡 大祐2021年度精密工学会秋季大会学術講演会講演論文集pp. 523-5242021年9月 21日~2021年9月 23日2021年度精密工学会秋季大会学術講演会オンライン
学会発表光学ガラスの表面下損傷の可視化(第3報)―各種光学ガラスの物性値に基づく応力解析―査読無その他国内共著遠藤 大暉;古城 直道;山口 智実;廣岡 大祐;角田 勝俊;棚田 憲一2021年度砥粒加工学会学術講演会講演論文集pp. 92-972021年9月 1日~2021年9月 3日2021年度砥粒加工学会学術講演会オンライン
国際学会Development of a Vibrator to Improve the Efficiency of Particle Excitation Flow Control Valve査読無その他国内共著Masaki KAWAKAMI;Daisuke HIROOKA;Tomomi YAMAGUCHI;Naomichi FURUSHIROAbstracts of the 15th International Symposium in Science and Technology 2021p. 1482021年8月 5日~2021年8月 6日15th International Symposium in Science and Technology 2021オンライン
国際学会Proposal of Driving Principle using New Vibration Mode Suitable for Miniaturization of Particle Excitation Flow Control Valve査読無その他国内共著Kensuke IKI;Daisuke HIROOKA;Tomomi YAMAGUCHI;Naomichi FURUSHIROAbstracts of the 15th International Symposium in Science and Technology 2021p.1572021年8月 5日~2021年8月 6日15th International Symposium in Science and Technology 2021オンライン
学会発表メカノケミカル砥石を利用した単結晶シリコンの超仕上げ(第3報)―砥石作業面中の硫酸バリウム砥粒の割合が超仕上げ性能に及ぼす影響―査読無その他国内共著池田 真遥;古城 直道;山口 智実;廣岡 大祐;角田 勝俊;棚田 憲一2021年度砥粒加工学会学術講演会講演論文集pp. 78-832021年6月 6日~2021年6月 8日2021年度砥粒加工学会学術講演会オンライン
学会発表微粒子励振型比例制御弁の開発―小型化を目指した新たな振動モードの提案―査読無その他国内共著伊木 謙介;廣岡 大祐;山口 智実;古城 直道ロボティクス・メカトロニクス講演会2P2-E122021年5月 26日~2021年5月 28日ロボティクス・メカトロニクス講演会オンライン
学会発表窒化された鋼の超精密切削において窒化前の熱処理が及ぼす影響(第3報)―ミクロ組織が被削性に及ぼす影響―査読無その他国内共著伊藤 駿亮;古城 直道;山口 智実;廣岡 大祐 2021年度精密工学会春季大会学術講演会講演論文集pp. 279-2802021年3月 16日~2021年3月 18日 2021年度精密工学会春季大会学術講演会オンライン
学会発表サブミクロンオーダ切削の高精度化に関する研究(第2報)―エンコーダ値に基づく周期的誤差の補正―査読無その他国内共著徳森 泰生;古城 直道;山口 智実;廣岡 大祐 2021年度精密工学会春季大会学術講演会講演論文集pp. 281-2822021年3月 16日~2021年3月 18日 2021年度精密工学会春季大会学術講演会オンライン
学会発表逐次精密切削観察システムを利用した鋼の微小硬さ分布測定(第4報)―加工機上での硬さ分布測定のための駆動方法の提案―査読無その他国内共著王 振亘;廣岡 大祐;古城 直道;山口 智実;横田 秀夫;藤崎 和弘;山下 典理男 2021年度精密工学会春季大会学術講演会講演論文集pp. 438-4392021年3月 16日~2021年3月 18日 2021年度精密工学会春季大会学術講演会オンライン
学会発表微粒子励振型比例制御弁の開発―効率的な駆動条件が実現可能な振動子の設計―査読無その他国内共著川上 征;五十嵐 充樹;廣岡 大祐;古城 直道;山口 智実第65回システム制御情報学会研究発表講演会(SCI'21)OS04-01-12021年3月 16日~2021年3月 18日第65回システム制御情報学会研究発表講演会(SCI'21)オンライン
講演精密加工と精密位置決め技術の組み合わせによる材料内部の3次元組織観察,ならびに硬さ分布の3次元解析システム査読無その他国内共著横田 秀夫;古城 直道国際画像機器展2020 国際画像セミナー:特別招待講演<精密加工>2020年12月 2日国際画像機器展2020パシフィコ横浜
学会発表逐次精密切削観察システムを利用した鋼の微小硬さ分布測定(第3報)―測定精度向上を目指した駆動条件の検討―査読無その他国内共著王 振亘;廣岡 大祐;古城 直道;山口 智実;横田 秀夫;藤崎 和弘;山下 典理男 2020年度精密工学会春季大会学術講演会講演論文集pp. 268-2692020年3月 17日~2020年3月 19日 2020年度精密工学会春季大会学術講演会東京農工大学
学会発表圧電振動を利用した流量制御弁における効率的な駆動を目指した振動子の開発査読無その他国内共著高先 涼輔;廣岡 大祐;古城 直道;山口 智実 2020年度精密工学会春季大会学術講演会講演論文集pp. 294-2952020年3月 17日~2020年3月 19日 2020年度精密工学会春季大会学術講演会東京農工大学
学会発表目直し条件がメカノケミカル砥石による単結晶シリコンの超仕上げ性能に及ぼす影響(第2報)―砥石作業面の観察に基づく寿命評価―査読無その他国内共著仲矢 進悟;古城 直道;山口 智実;廣岡 大祐;松森 昇;棚田 憲一 2020年度精密工学会春季大会学術講演会講演論文集pp. 474-4752020年3月 17日~2020年3月 19日 2020年度精密工学会春季大会学術講演会東京農工大学
学会発表窒化された鋼のダイヤモンド切削においてミクロ組織が工具摩耗抑制に及ぼす影響査読無その他国内共著古城 直道;山口 智実;廣岡 大祐 2019年度精密工学会秋季大会学術講演会講演論文集pp. 432-4332019年9月 4日~2019年9月 6日 2019年度精密工学会秋季大会学術講演会静岡大学
学会発表窒化された鋼の超精密切削において窒化前の熱処理が及ぼす影響(第2報)―工具摩耗機構の熱力学的解析―査読無その他国内共著伊藤 駿亮;古城 直道;山口 智実;廣岡 大祐 2019年度精密工学会秋季大会学術講演会講演論文集pp. 430-4312019年9月 4日~2019年9月 6日 2019年度精密工学会秋季大会学術講演会静岡大学
学会発表銅単結晶(111)の超精密切削機構に関する研究査読無その他国内共著古城 直道;廣岡 大祐;山口 智実2019年度砥粒加工学会学術講演会pp. 105-1072019年8月 28日~2019年8月 30日2019年度砥粒加工学会学術講演会埼玉大学
論文目直し条件がメカノケミカル砥石による単結晶シリコンの超仕上げ性能に及ぼす影響査読有学術雑誌国内共著仲矢 進悟;古城 直道;山口 智実;廣岡 大祐;松森 昇;棚田 憲一砥粒加工学会誌63 (8), pp. 415-4202019年8月
学会発表微粒子励振型比例制御弁の開発―開口条件の確認を目指した空圧変化実験―査読無その他国内共著廣岡 大祐;古城 直道;山口 智実ロボティクス・メカトロニクス講演会 2019講演論文集1P1-K082019年6月 5日~2019年6月 8日ロボティクス・メカトロニクス講演会 2019広島国際会議場
論文微粒子励振型流量制御弁におけるねじり振動を利用した駆動原理の有効性評価査読有学術雑誌国内共著廣岡 大祐;東 一毅;古城 直道;山口 智実;鈴森 康一;神田 岳文日本フルードパワーシステム学会論文集50 (1), pp. 1-82019年4月
学会発表ダイヤモンド超砥粒砥石を用いたサファイアの多段超仕上げ(第3報)―砥石の弾性変形を考慮した仕上量推定方法に基づく工程改善―査読無その他国内共著阪口 真太郎;古城 直道;山口 智実;廣岡 大祐;松森 昇;棚田 憲一 2019年度精密工学会春季大会学術講演会講演論文集pp. 662-6632019年3月 13日~2019年3月 15日 2019年度精密工学会春季大会学術講演会東京電機大学
学会発表浸炭した鋼のダイヤモンド切削においてミクロ組織が工具摩耗に及ぼす影響(第2報)―浸炭前後の熱処理の影響―査読無その他国内共著井上 晋;古城 直道;廣岡 大祐;山口 智実 2019年度精密工学会春季大会学術講演会講演論文集pp. 660-6612019年3月 13日~2019年3月 15日 2019年度精密工学会春季大会学術講演会東京電機大学
国際学会Improvement of Multistage Superfinishing of Sapphire with Vitrified-bonded Diamond Superabrasive Stones査読無その他国内共著Naomichi FURUSHIRO;Tomomi YAMAGUCHI;Daisuke HIROOKA;Noboru MATSUMORI;Kenichi TANADAProceedings of ASPE 2018 Annual Meeting2018年11月 4日~2018年11月 8日ASPE 2018 Annual MeetingLas Vegas, Nevada, USA
学会発表微粒子励振型流量比例制御弁を用いた空気圧シリンダの制御査読無その他国内共著林田 岳士;廣岡 大祐;古城 直道;山口 智実平成30年秋季フルードパワーシステム講演会講演論文集2018年10月 25日~2018年10月 26日平成30年秋季フルードパワーシステム講演会京都教育文化センター
学会発表逐次精密切削観察システムを利用した鋼の微小硬さ分布測定(第2報)―機上での微小押込み試験―査読無その他国内共著川井 紳之介;古城 直道;廣岡 大祐;横田 秀夫;藤崎 和弘;山下 典理男第12回生産加工・工作機械部門講演会講演論文集2018年10月 13日~2018年10月 14日第12回生産加工・工作機械部門講演会兵庫県立大学
論文Effect of Microstructure on Mitigating Tool Wear in Diamond Turning of Nitrided Steels査読有学術雑誌国内共著Naomichi FURUSHIRO;Tomomi YAMAGUCHI;Daisuke HIROOKA;Masaya SHIRAKAWA;Shigehiro MATSUDA;Yasuhiro IWASA;Yasuhiro IWASA;Shuntaro TERAUCHIPrecision Engineering54, pp. 388-3952018年10月 10.1016/j.precisioneng.2018.07.008
国際学会The Method of Improving Flow Characteristics for Air Flow Control Valve Using Particle Excitation by PZT Transducer査読無その他国内共著Yuya MIYAKE;Tomomi YAMAGUCHI;Naomichi FURUSHIRO;Daisuke HIROOKAProceedings of International Workshop on Piezoelectric Materials and Applications in Actuators (IWPMA2018)p. 1162018年9月 11日~2018年9月 14日International Workshop on Piezoelectric Materials and Applications in Actuators (IWPMA2018)Kobe, Japan
国際学会Evaluation of the Effectiveness of Flow Control Valve Utilizing Torsional Vibration by PZT Transducer査読無その他国内共著Ryosuke TAKASAKI;Daisuke HIROOKA;Naomichi FURUSHIRO;Tomomi YAMAGUCHIProceedings of International Workshop on Piezoelectric Materials and Applications in Actuators (IWPMA2018)p. 1182018年9月 11日~2018年9月 14日International Workshop on Piezoelectric Materials and Applications in Actuators (IWPMA2018)Kobe, Japan
学会発表ダイヤモンド超砥粒砥石を用いたサファイアの多段超仕上における粗仕上工程の改善査読無その他国内共著古城 直道;山口 智実;廣岡 大祐;松森 昇;棚田 憲一日本機械学会2018年度年次大会講演論文集S13201042018年9月 9日~2018年9月 12日日本機械学会2018年度年次大会関西大学
学会発表ダイヤモンド工具による純鉄切削における工具摩耗現象の解明実験による初期炭素拡散挙動に関する検討査読無その他国内共著吉田 侑平;山口 智実;古城 直道;廣岡 大祐日本機械学会2018年度年次大会講演論文集S13203032018年9月 9日~2018年9月 12日日本機械学会2018年度年次大会関西大学
学会発表光学ガラスの表面下損傷の可視化(第2報)―位置合わせ精度向上および線形補間による改善―査読無その他国内共著浜川 亮太;古城 直道;山口 智実;廣岡 大祐;松森 昇;棚田 憲一2018年度砥粒加工学会学術講演会講演論文集C192018年8月 29日~2018年8月 31日2018年度砥粒加工学会学術講演会金沢大学
学会発表メカノケミカル砥石を利用した単結晶シリコンの超仕上げ(第2報)―目直し条件が砥石の超仕上げ性能に及ぼす影響―査読無その他国内共著仲矢 進悟;古城 直道;山口 智実;廣岡 大祐;松森 昇;棚田 憲一2018年度砥粒加工学会学術講演会講演論文集A092018年8月 29日~2018年8月 31日2018年度砥粒加工学会学術講演会金沢大学
学会発表純鉄との接触加熱によるダイヤモンド表面への溝加工―除去量増加のための加工プロセスの検討―査読無その他国内共著吉見 勇人;山内 靖也;山口 智実;古城 直道;廣岡 大祐2018年度精密工学会春季大会学術講演会講演論文集pp. 31-322018年3月 15日~2018年3月 17日2018年度精密工学会春季大会学術講演会中央大学
学会発表単結晶シリコンの超仕上げにおける砥石表面状態の影響査読無その他国内共著土肥 一輝;古城 直道;山口 智実;廣岡 大祐;松森 昇;棚田 憲一2018年度精密工学会春季大会学術講演会講演論文集pp. 279-2802018年3月 15日~2018年3月 17日2018年度精密工学会春季大会学術講演会中央大学
学会発表窒化された鋼の超精密切削において窒化前の熱処理が及ぼす影響査読無その他国内共著白川 将也;古城 直道;廣岡 大祐;山口 智実;松田 茂敬;岩佐 康弘;寺内 俊太郎2018年度精密工学会春季大会学術講演会講演論文集pp. 359-3602018年3月 15日~2018年3月 17日2018年度精密工学会春季大会学術講演会中央大学
学会発表光学ガラスの表面下損傷可視化の高精度化査読無その他国内共著大久保 至道;古城 直道;山口 智実;廣岡 大祐;松森 昇;棚田 憲一日本機械学会 関西学生会2017年度学生員卒業研究発表講演会講演前刷集p.11-192018年3月 10日日本機械学会 関西学生会2017年度学生員卒業研究発表講演会摂南大学
学会発表超低熱膨張セラミックスの超仕上査読無その他国内共著白澤 寿;古城 直道;山口 智実;廣岡 大祐;松森 昇;棚田 憲一日本機械学会 関西学生会2017年度学生員卒業研究発表講演会講演前刷集p. 11-12018年3月 10日日本機械学会 関西学生会2017年度学生員卒業研究発表講演会摂南大学
講演銅単結晶の超精密切削特性―加工変質層と工具摩耗―査読無その他単著古城 直道第60回 マイクロ加工懇談会 (第48回 マイクロ成形研究委員会)2018年3月 1日第60回 マイクロ加工懇談会 (第48回 マイクロ成形研究委員会)理化学研究所 板橋分室
論文光学ガラスの表面下損傷の可視化査読有学術雑誌国内共著古城 直道;浜川 亮太;山口 智実;廣岡 大祐;松森 昇;棚田 憲一砥粒加工学会誌62 (1), pp. 33-382018年1月 10.11420/jsat.62.33
国際学会Improvement of Removal Amount Estimation Method in Multistage Superfinishing of Sapphire査読有その他国内共著Shintaro SAKAGUCHI;Naomichi FURUSHIRO;Tomomi YAMAGUCHI;Daisuke HIROOKA;Noboru MATSUMORI;Kenichi TANADAProceedings of 20th International Symposium on Advances in Abrasive Technology (ISAAT2017)pp. 153-1592017年12月 3日~2017年12月 6日ISAAT2017Okinawa, Japan
論文鋼のダイヤモンド切削における工具摩耗の抑制 (浸炭した鋼の組織が及ぼす影響)査読有学術雑誌国内共著辻野 元大;古城 直道;山口 智実;廣岡 大祐;松田 茂敬;岩佐 康弘;寺内 俊太郎日本機械学会論文集83 (856), p. 17-001612017年12月 10.1299/transjsme.17-00161
国際学会Influence of Crystal Anisotropy on Ultra-precision Cutting of Single Crystal Copper (111) Surface査読有その他国内共著Shinnosuke KAWAI;Naomichi FURUSHIRO;Daisuke HIROOKA;Tomomi YAMAGUCHIProceedings of 9th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) C14 (091)2017年11月 13日~2017年11月 17日9th LEM21Hiroshima, Japan
国際学会Study on Factors of Tool Wear in Diamond Turning of Carburized Steel using Decision Trees査読有その他国内共著Shin INOUE;Naomichi FURUSHIRO;Daisuke HIROOKA;Tomomi YAMAGUCHI;Shigehiro MATSUDA;Yasuhiro IWASA;Shuntaro TERAUCHIProceedings of 9th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) C15 (092)2017年11月 13日~2017年11月 17日9th LEM21Hiroshima, Japan
論文Three-dimensional Observation of Microstructure of Bone Tissue Using High-precision Machining査読有学術雑誌国内共著Naomichi FURUSHIRO;Hideo YOKOTA;Sakiko NAKAMURA;Kazuhiro FUJISAKI;Yutaka YAMAGATA;Mitsunori KOKUBO;Ryutaro HIMENO;Akitake MAKINOUCHI;Toshiro HIGUCHIInternational Journal of Automation Technology11 (6), pp. 883-8942017年11月 10.20965/ijat.2017.p0883
論文銅単結晶の超精密切削におけるシュミット因子の影響査読有学術雑誌国内共著古城 直道;畠中 佑斗;山口 智実;廣岡 大祐;島田 尚一精密工学会誌83 (10), pp. 967-9712017年10月 10.2493/jjspe.83.967
論文Optimization of Orifice Position in Particle-exciation Valve for Proportional Flow Control査読有学術雑誌国内共著Daisuke HIROOKA;Tomomi YAMAGUCHI;Naomichi FURUSHIRO;Koichi SUZUMORI;Takefumi KANDAROBOMECH Journal4 (25), pp. 1-112017年10月 10.1186/s40648-017-0093-3
学会発表ダイヤモンド切削における工具摩耗の抑制―窒化された鋼の組織が及ぼす影響―査読無その他国内共著白川 将也;古城 直道;廣岡 大祐;山口 智実;松田 茂敬;岩佐 康弘;寺内 俊太郎2017年度精密工学会秋季大会学術講演会講演論文集pp. 77-782017年9月 20日~2017年9月 22日2017年度精密工学会秋季大会学術講演会大阪大学
学会発表逐次精密切削観察システムを利用した鋼の微小硬さ分布測定査読無その他国内共著古城 直道;白川 将也;横田 秀夫;藤崎 和弘;山下 典理男2017年度精密工学会秋季大会学術講演会講演論文集pp. 79-802017年9月 20日~2017年9月 22日2017年度精密工学会秋季大会学術講演会大阪大学
学会発表純鉄との接触加熱によるダイヤモンド表面への溝加工―加工特性と加熱条件との関係―査読無その他国内共著山内 靖也;山口 智実;古城 直道;廣岡 大祐2017年度精密工学会秋季大会学術講演会講演論文集pp. 653-6542017年9月 20日~2017年9月 22日2017年度精密工学会秋季大会学術講演会大阪大学
学会発表微粒子励振型空気流量比例制御弁の流量特性の改善方法の考案―第4報 制御領域の拡大を目指した微粒子による開口条件の調節―査読無その他国内共著三宅 優哉;廣岡 大祐;古城 直道;山口 智実2017年度精密工学会秋季大会学術講演会講演論文集pp. 733-7342017年9月 20日~2017年9月 22日2017年度精密工学会秋季大会学術講演会大阪大学
学会発表ねじり振動を利用した流量制御弁の開発―オリフィスの開口条件の検討―査読無その他国内共著東 一毅;廣岡 大祐;古城 直道;山口 智実2017年度精密工学会秋季大会学術講演会講演論文集pp. 751-7522017年9月 20日~2017年9月 22日2017年度精密工学会秋季大会学術講演会大阪大学
講演表面改質・熱処理による鋼のダイヤモンド切削における被削性向上査読無その他単著古城 直道平成29年度中部大学 生産技術開発センター講演会2017年9月 7日平成29年度中部大学 生産技術開発センター講演会中部大学
論文Development of Removal Amount Estimation Method based on Calculation of Elastic Deformation of Superabrasive Stones during Multistage Superfinishing of Sapphire査読有学術雑誌国内共著Naomichi FURUSHIRO;Tomomi YAMAGUCHI;Daisuke HIROOKA;Masashi YAMAGUCHI;Noboru MATSUMORI;Kenichi TANADAInternational Journal of Automation Technology11 (5), pp. 742-7532017年9月 10.20965/ijat.2017.p0742
学会発表光学ガラスの表面下損傷の可視化査読無その他国内共著浜川 亮太;古城 直道;山口 智実;廣岡 大祐;松森 昇;棚田 憲一2017年度砥粒加工学会学術講演会講演論文集pp. 171-1762017年8月 30日~2017年9月 1日ABTEC2017福岡工業大学
学会発表メカノケミカル砥石を利用した単結晶シリコンの超仕上げ―目直しが及ぼす影響―査読無その他国内共著土肥 一輝;古城 直道;山口 智実;廣岡 大祐;松森 昇;棚田 憲一2017年度砥粒加工学会学術講演会講演論文集pp. 303-3052017年8月 30日~2017年9月 1日ABTEC2017福岡工業大学
論文ニッケルおよび無電解ニッケルの超精密切削加工におけるダイヤモンド工具の損耗機構査読有学術雑誌国内共著宇田 豊;名越 将大;宇治宮 俊樹;本田 索郎;江上 喜幸;田中 宏明;古城 直道;島田 尚一精密工学会誌83 (8), pp. 762-7692017年8月 10.2493/jjspe.83.762
国際学会Nitrides in Nitriding Steels Diminish Diffusion Wear in Diamond Turning査読有その他国内共著Naomichi FURUSHIRO;Daisuke HIROOKA;Tomomi YAMAGUCHI;Shigehiro MATSUDA;Yasuhiro IWASA;Shuntaro TERAUCHIProceedings of 17th euspen International Conferencepp. 203-2042017年5月 29日~2017年6月 2日17th euspen International ConferenceHanover, Germany
学会発表微粒子励振型比例制御弁の開発―流量特性の安定を目指したオリフィス条件の改良―査読無その他国内共著廣岡 大祐;古城 直道;山口 智実日本機械学会ロボティクス・メカトロニクス講演会 20172A1-B022017年5月 11日~2017年5月 13日日本機械学会ロボティクス・メカトロニクス講演会 2017福島
学会発表銅単結晶の超精密切削におけるシュミット因子の影響査読無その他国内共著畠中 佑斗;古城 直道;廣岡 大祐;山口 智実2017年度精密工学会春季大会学術講演会講演論文集pp. 643-6442017年3月 13日~2017年3月 15日2017年度精密工学会春季大会学術講演会慶應義塾大学
学会発表浸炭した鋼のダイヤモンド切削においてミクロ組織が工具摩耗に及ぼす影響査読無その他国内共著辻野 元大;古城 直道;廣岡 大祐;山口 智実;松田 茂敬;岩佐 康弘;寺内 俊太郎2017年度精密工学会春季大会学術講演会講演論文集pp. 645-6462017年3月 13日~2017年3月 15日2017年度精密工学会春季大会学術講演会慶應義塾大学
学会発表微粒子励振型空気流量比例制御弁の流量特性の改善方法の考案―第3報 応答性の改善を目指した新たな駆動方法の提案―査読無その他国内共著三宅 優哉;廣岡 大祐;古城 直道;山口 智実2017年度精密工学会春季大会学術講演会講演論文集pp. 155-1562017年3月 13日~2017年3月 15日2017年度精密工学会春季大会学術講演会慶應義塾大学
論文Particle-Excitation Flow-Control Valve using Piezo Vibration-Improvement for a High Flow Rate and Research on Controllability査読無学術雑誌国内共著Daisuke HIROOKA;Tomomi YAMAGUCHI;Naomichi FURUSHIRO;Koichi SUZUMORI;Takefumi KANDA電気学会論文誌E(センサ・マイクロマシン部門誌)137 (1), pp. 32-372017年1月 IUS 201510.1541/ieejsmas.137.32
国際学会Multistage Superfinishing of Sapphire with Vitrified-bonded Diamond Superabrasive Stones査読無その他国内共著Naomichi FURUSHIRO;Tomomi YAMAGUCHI;Daisuke HIROOKA;Noboru MATSUMORI;Kenichi TANADAProceedings of ASPE 2016 Annual Meetingpp. 478-4822016年10月 23日~2016年10月 28日31st ASPE Annual MeetingPortland Marriott Downtown Waterfront Hotel Portland, Oregon, USA
学会発表鋼のダイヤモンド切削における工具摩耗の抑制―浸炭した鋼の組織が及ぼす影響―査読無その他国内共著辻野 元大;古城 直道;廣岡 大祐;山口 智実;松田 茂敬;岩佐 康弘;寺内 俊太郎第11回生産加工・工作機械部門講演会講演論文集pp. 115-1162016年10月 22日~2016年10月 23日第11回生産加工・工作機械部門講演会名古屋大学
国際学会Highly Responsive and Stable Flow Control Valve using a PZT Transducer査読無その他国内共著Daisuke HIROOKA;Tomomi YAMAGUCHI;Naomichi FURUSHIRO;Koichi SUZUMORI;Takefumi KANDAProceedings of 2016 IEEE International Ultrasonics Symposium (IUS 2016)pp. 399-4002016年9月 18日~2016年9月 21日IUS 2016
学会発表銅単結晶の超精密切削における加工変質層査読無その他国内共著畠中 佑斗;古城 直道;廣岡 大祐;山口 智実日本機械学会2016年度年次大会講演論文集 S13103042016年9月 11日~2016年9月 14日日本機械学会2016年度年次大会九州大学
論文Development of Novel Particle Excitation Flow Control Valve for Stable Flow Characteristics査読有学術雑誌国内共著Daisuke HIROOKA;Tomomi YAMAGUCHI;Naomichi FURUSHIRO;Koichi SUZUMORI;Takefumi KANDAInternational Journal of Automation Technology10 (4), pp. 540-5482016年7月 10.20965/ijat.2016.p0540
国際学会High Response Proportional Flow Control Valve using Particle Excitation査読有その他国内共著Daisuke HIROOKA;Tomomi YAMAGUCHI;Naomichi FURUSHIRO;Koichi SUZUMORI;Takefumi KANDAProceedings of 15th International Conference on New Actuators (ACTUATOR 16)pp. 241-2442016年6月 13日~2016年6月 15日ACTUATOR 16
学会発表微粒子励振型空気流量比例制御弁の流量特性の改善方法の考案 第2報 安定流量域の拡大査読無その他国内共著廣岡 大祐;古城 直道;山口 智実;塩見 和樹;福川 裕也;鈴森 康一;神田 岳文2016年度精密工学会春季大会学術講演会講演論文集pp. 387-3882016年3月 15日~2016年3月 17日2016年度精密工学会春季大会学術講演会東京理科大学
学会発表ダイヤモンド超砥粒砥石を用いたサファイアの多段超仕上げ(第2報)―加工中の弾性変形を考慮した真実接触圧力と仕上げ量の関係―査読無その他国内共著山口 雅史;古城 直道;廣岡 大祐;山口 智実;松森 昇;棚田 憲一2016年度精密工学会春季大会学術講演会講演論文集pp. 233-2342016年3月 15日~2016年3月 17日2016年度精密工学会春季大会学術講演会東京理科大学
国際学会Small Size Pneumatic Valve for Smooth Flow Control using PZT Vibrator査読無その他国内共著Daisuke HIROOKA;Tomomi YAMAGUCHI;Naomichi FURUSHIRO;Koichi SUZUMORI;Takefumi KANDAProceedings of 2015 IEEE International Ultrasonics Symposium (IUS 2015)p. 2752015年10月 21日~2015年10月 24日Taipei, Taiwan
学会発表ダイヤモンド切削における工具摩耗を抑制する窒化した鋼の分析査読無その他国内共著畠中 佑斗;古城 直道;廣岡 大祐;山口 智実;松田 茂敬;岩佐 康弘;寺内 俊太郎2015年度精密工学会秋季大会学術講演会講演論文集pp. 215-2162015年9月 4日~2015年9月 6日2015年度精密工学会秋季大会学術講演会東北大学
学会発表分子動力学法を用いた純鉄中への炭素拡散接触モデルの構築-荷重と移動速度の付与による検討-査読無その他国内共著山本 卓也;山口 智実;古城 直道;廣岡 大祐;齋藤 賢一2015年度精密工学会秋季大会学術講演会講演論文集pp. 227-2282015年9月 4日~2015年9月 6日2015年度精密工学会秋季大会学術講演会東北大学
学会発表酸化セリウム砥石を用いた光学ガラスの精密仕上げ-ガラス仕上げ量のサブミクロンオーダ測定-査読無その他国内共著田中 延瑛;古城 直道;廣岡 大祐;山口 智実;松森 昇;棚田 憲一2015年度精密工学会秋季大会学術講演会講演論文集pp. 485-4862015年9月 4日~2015年9月 6日2015年度精密工学会秋季大会学術講演会東北大学
学会発表微粒子励振型空気流量比例制御弁の流量特性の改善方法の考案査読無その他国内共著塩見 和樹;福川 裕也;廣岡 大祐;古城 直道;山口 智実;鈴森 康一;神田 岳文2015年度精密工学会秋季大会学術講演会講演論文集pp. 883-8842015年9月 4日~2015年9月 6日2015年度精密工学会秋季大会学術講演会東北大学
国際学会Research on Controllability of the Particle Excitation Flow Control Valve査読無その他国内共著Daisuke HIROOKA;Tomomi YAMAGUCHI;Naomichi FURUSHIRO;Koichi SUZUMORI;Takefumi KANDAProceedings of the 6th International Conference on Manufacturing, Machine Design and Tribology (ICMDT2015)pp. 136-1372015年4月 22日~2015年4月 25日ICMDT2015Okinawa, Japan
学会発表浸炭した鋼のダイヤモンド切削において炭化物が工具摩耗抑制に及ぼす影響査読無その他国内共著山崎 智史;古城 直道;廣岡 大祐;山口 智実;松田 茂敬;岩佐 康弘;寺内 俊太郎単結晶ダイヤモンド工具;摩耗;鋼;超精密切削;浸炭;炭化物2015年度精密工学会春季大会学術講演会講演論文集pp. 301-3022015年3月 17日~2015年3月 19日2015年度精密工学会春季大会学術講演会東洋大学
学会発表サブミクロンオーダ切削の高精度化に関する研究査読無その他国内共著杉谷 泰希;古城 直道;廣岡 大祐;山口 智実超精密切削;熱変位;高精度加工;加工変質層2015年度精密工学会春季大会学術講演会講演論文集pp. 303-3042015年3月 17日~2015年3月 19日2015年度精密工学会春季大会学術講演会東洋大学
学会発表ダイヤモンド超砥粒砥石を用いたサファイアの多段超仕上げ査読無その他国内共著山口 雅史;古城 直道;廣岡 大祐;山口 智実;松森 昇;棚田 憲一超仕上げ;サファイア;ダイヤモンド超砥粒砥石;多段階仕上2015年度精密工学会春季大会学術講演会講演論文集pp. 1017-10182015年3月 17日~2015年3月 19日2015年度精密工学会春季大会学術講演会東洋大学
論文微粒子励振型流量制御弁を用いた空気圧シリンダの速度制御査読有学術雑誌国内共著廣岡 大祐;山口 智実;古城 直道;鈴森 康一;神田 岳文日本フルードパワーシステム学会論文集46 (2), pp. 7-132015年3月 10.5739/jfps.46.7
国際学会Suppression of Tool Wear in Turning of Steels by Surface Modification – Effect of Nitriding –査読無その他国内共著Naomichi FURUSHIRO;Daisuke HIROOKA;Tomomi YAMAGUCHI;Shigehiro MATSUDA;Yasuhiro IWASA;Shuntaro TERAUCHIProceedings of ASPE 2014 Annual Meetingpp. 555-5582014年11月 9日~2014年11月 14日29th ASPE Annual MeetingThe Westin Boston Waterfront, Boston, MA, USA
国際学会Superfinishing Characteristics of Single Crystal Silicon with Mechanochemical Superabrasive Stone Containing BaSO4 Abrasive査読有その他国内共著Naomichi FURUSHIRO;Tomomi YAMAGUCHI;Daisuke HIROOKA;Noboru MATSUMORI;Hidekazu OGURAsuperfinishing;mechanochemical superabrasive stone;silicon;barium sulfateProceedings of 14th euspen International Conferencepp. 194-1972014年6月 2日~2014年6月 6日14th euspen International ConferenceDubrovnik, Croatia
学会発表メカノケミカル複合超砥粒砥石の5因子がサファイアの超仕上性能に及ぼす影響査読無その他国内共著田中 慎二;古城 直道;廣岡 大祐;山口 智実;松森 昇;尾倉 秀一超仕上;サファイア;メカノケミカル超砥粒砥石;硬度;砥粒率2014年度精密工学会春季大会学術講演会講演論文集pp. 645-6462014年3月 18日~2014年3月 20日2014年度精密工学会春季大会学術講演会東京大学
学会発表表面改質した鋼のダイヤモンド切削における工具摩耗抑制(第4報)―窒化したステンレス鋼における摩耗特性-査読無その他国内共著池内 靖貴;古城 直道;廣岡 大祐;山口 智実;松田 茂敬;岩佐 康弘;寺内 俊太郎ダイヤモンド工具;摩耗;ステンレス鋼;超精密切削;窒化2014年度精密工学会春季大会学術講演会講演論文集pp. 1227-12282014年3月 18日~2014年3月 20日2014年度精密工学会春季大会学術講演会東京大学
国際学会Suppression of Tool Wear in Diamond Turning by Surface Modification of Steels - Effect of Carbides in Carburized Steels -査読無その他国内共著Naomichi FURUSHIRO;Daisuke HIROOKA;Tomomi YAMAGUCHI;Shuntaro TERAUCHI;Yasuhiro IWASA;Shigehiro MATSUDAProceedings of ASPE 2013 Annual Meetingpp. 385-3882013年10月 20日~2013年10月 25日28th ASPE Annual MeetingCrowne Plaza St. Paul – Riverfront, St. Paul, MN, USA
論文セリアを含むメカノケミカル超砥粒砥石の作業面トポグラフィのモデリング査読有学術雑誌国内共著山口 智実;古城 直道;島田 尚一;松森 昇;尾倉 秀一;廣岡 大祐砥粒加工学会誌57 (7), pp. 453-4582013年7月 10.11420/jsat.57.453
学会発表分子動力学法を用いた鉄―炭素バルク間における炭素拡散挙動解析―査読無その他国内共著梅川 祐輔;山口 智実;古城 直道;廣岡 大祐;齋藤 賢一機械学会関西支部第88期講演会講演論文集2013年3月 16日~2013年3月 17日機械学会関西支部第88期講演会大阪工業大学
学会発表メカノケミカル複合超砥粒砥石によるサファイアの超仕上性能査読無その他国内共著田中 慎二;古城 直道;廣岡 大祐;山口 智実;松森 昇;尾倉 秀一超仕上;サファイア;コロイダルシリカ;メカノケミカル超砥粒砥石;ダイヤモンド砥石2013年度精密工学会春季大会学術講演会講演論文集pp. 967-9682013年3月 13日~2013年3月 15日2013年度精密工学会春季大会学術講演会東京工業大学
学会発表硫酸バリウム砥粒砥石による単結晶シリコンの超仕上性能査読無その他国内共著荒木 大秀;古城 直道;廣岡 大祐;山口 智実;松森 昇;尾倉 秀一超仕上;単結晶シリコン;メカノケミカル超砥粒砥石;硫酸バリウム;酸化2013年度精密工学会春季大会学術講演会講演論文集pp. 961-9622013年3月 13日~2013年3月 15日2013年度精密工学会春季大会学術講演会東京工業大学
学会発表銅単結晶におけるサブミクロンオーダ切削の高精度化に関する研究―超精密切削特性に及ぼす結晶異方性の影響―査読無その他国内共著西村 成人;古城 直道;廣岡 大祐;山口 智実;島田 尚一超精密切削;サブミクロンオーダ切削;弾性回復量;高精度加工;結晶異方性;銅単結晶2013年度精密工学会春季大会学術講演会講演論文集pp. 219-2202013年3月 13日~2013年3月 15日2013年度精密工学会春季大会学術講演会東京工業大学
学会発表表面改質した鋼のダイヤモンド切削における工具摩耗抑制(第3報)―浸炭鋼において炭化物が及ぼす影響̶査読無その他国内共著山崎 智史;古城 直道;廣岡 大祐;山口 智実;松田 茂敬;岩佐 康弘;寺内 俊太郎単結晶ダイヤモンド工具;摩耗;鋼;超精密切削;浸炭;炭化物2013年度精密工学会春季大会学術講演会講演論文集pp. 217-2182013年3月 13日~2013年3月 15日2013年度精密工学会春季大会学術講演会東京工業大学
国際学会Superfinishing Performance of Bearing Steel with CeO2 Superabrasive Stone査読無その他国内共著Naomichi FURUSHIRO;Tomomi YAMAGUCHI;Noboru MATSUMORI;Hidekazu OGURA;Shoichi SHIMADAsuperfinishing;bearing steel;mechanochemical superabrasive stone;cerium dioxide abrasive;stone gradeProceedings of ASPE 2012 Annual Meetingpp. 308-3112012年10月 21日~2012年10月 26日27th ASPE Annual MeetingHyatt Regency La Jolla at Aventine, San Diego, CA USA
学会発表セリア含有メカノケミカル砥石による軸受鋼の超仕上性能査読無その他国内共著井上 善朗;古城 直道;山口 智実;松森 昇;尾倉 秀一超仕上;軸受鋼;メカノケミカル超砥粒砥石;酸化セリウム砥粒2012年度精密工学会春季大会学術講演会講演論文集pp. 307-3082012年3月 14日~2012年3月 16日2012年度精密工学会春季大会学術講演会首都大学東京
論文ダイヤモンド工具の摩耗に及ぼす鋼材組織の影響査読有学術雑誌国内共著寺内 俊太郎;松田 茂敬;古城 直道;杉本 隆史commercial steels;diamond tools;tool wear;diamond turnability;inductive inference methodology;carbide鉄と鋼97 (12), pp. 631-6362011年12月 10.2355/tetsutohagane.97.631Excessive tool wear occurs when commercial steels are single-point diamond turned. Therefore, the development of diamond turnable steel is expected in the manufacture of molds for complex and precise optical components. As an initiate approach to this subject, various kinds of quenched and tempered steels were turned using single-crystal diamond tools, and tool wear measurement was made with a scanning electron microscopy. As a result, the various amounts of coner wear was observed by the diamond tool, and the width of wear was found to be different in a kind of steels. In order to clear up this cause, constituent phase analysis of the steels used in the turning experiments was carried out by X-ray diffraction. It gave that their microstructures differed considerably from steel to steel and were classified into four group, those are α-ferrite, α-ferrite + γ-austenite, γ-austenite, and α-ferrite + such carbides as Fe3C, Cr23C6 and WC. On the basis of these results, the inductive inference methodology was applied to the tool wear measurement and phase analysis. From the results, the steel whose microstructure consists of particle carbide precipitation on α-ferrite matrix, e.g. JIS SK85, SUS420J2, SKS3 etc., suppresses diamond tool wear because the carbides prevent carbon diffusion into iron in turning of steel.
国際学会Suppression of Tool Weaer in Diamond Turning of Steels by Surface Modification - Effect of Carburizing -査読無その他国内共著Naomichi FURUSHIRO;Tomomi YAMAGUCHI;Shuntaro TERAUCHI;Shigehiro MATSUDA;Shoichi SHIMADAultraprecision cutting;diamond tool;steel;wear;surface modificationProceedings of ASPE 2011 Annual Meetingpp. 345-3482011年11月 13日~2011年11月 18日26th ASPE Annual MeetingDenver Marriott City Center Hotel, Denver, CO, USACarbide precipitation on α-ferrite phase suppresses diamond tool wear in turning of steels because carbides prevent carbon diffusion into iron. In this paper, we investigate tool wear and surface integrity after turning of hot work die steel JIS SKD61: quenched and tempered steel, and carburized one. Results indicate that the carburized steel suppresses diamond tool wear, and improves surface integrity of ultraprecision cutting.
学会発表浸炭および窒化された鋼のダイヤモンド切削における工具摩耗抑制査読無その他国内共著乾 裕美子;古城 直道;山口 智実;寺内 俊太郎;松田 茂敬単結晶ダイヤモンド工具;摩耗;鋼;超精密切削;浸炭;窒化2011年度精密工学会秋季大会学術講演会講演論文集pp. 67-682011年9月 20日~2011年9月 22日2011年度精密工学会秋季大会学術講演会金沢大学
学会発表硫酸バリウム含有メカノケミカル複合超砥粒砥石による単結晶シリコンの超仕上性能査読無その他国内共著荒木 大秀;古城 直道;山口 智実;松森 昇;尾倉 秀一超仕上;単結晶シリコン;メカノケミカル超砥粒砥石;硫酸バリウム;耐摩耗性2011年度精密工学会秋季大会学術講演会講演論文集pp. 761-7622011年9月 20日~2011年9月 22日2011年度精密工学会秋季大会学術講演会金沢大学
論文Three-Dimensional Microscopic Elemental Analysis Using an Automated High-Precision Serial Sectioning System査読有学術雑誌国内共著Kazuhiro FUJISAKI;Hideo YOKOTA (RIKEN);Naomichi FURUSHIRO;Shintaro KOMATANI;Sumito OHZAWA;Yoshimichi SATO;Daisuke MATSUNAGA;Ryutaro HIMENO;Toshiro HIGUCHI;Akitake MAKINOUCHIserial sectioning;elemental mapping;microscopic structure;precision cutting;three-dimensional model;internal structure;automationMicroscopy and Microanalysis17 (2), pp. 246-2512011年4月 10.1017/S143192761009450XThe elemental composition and microscopic-level shape of inclusions inside industrial materials are considered important factors in fracture analytical studies. In this work, a three-dimensional (3D) microscopic elemental analysis system based on a serial sectioning technique was developed to observe the internal structure of such materials. This 3D elemental mapping system included an X-ray fluorescence analyzer and a high-precision milling machine. Control signals for the X-ray observation process were automatically sent from a data I/O system synchronized with the precision positioning on the milling machine. Composite specimens were used to confirm the resolution and the accuracy of 3D models generated from this system. Each of the two specimens was composed of three metal wires of 0.5 mm diameter braided into a single twisted wire that was placed inside a metal pipe; the pipe was then filled with either epoxy resin or Sn. The milling machine was used to create a mirror-finish cross-sectional surface on these specimens, and elemental analyses were performed. The twisted wire structure was clearly observed in the resulting 3D models. This system enables automated investigation of the 3D internal structure of materials as well as the identification of their elemental components.
学会発表硫酸バリウム砥粒を含むメカノケミカル超砥粒砥石による単結晶シリコンの超仕上特性査読無その他国内共著平嶺 雄;古城 直道;樋口 誠宏;山口 智実;松森 昇;尾倉 秀一超仕上;単結晶シリコン;メカノケミカル超砥粒砥石;硫酸バリウム2011年度精密工学会春季大会学術講演会講演論文集pp. 289-2902011年3月 14日~2011年3月 16日2011年度精密工学会春季大会学術講演会東洋大学(大震災により中止)
学会発表表面改質した鋼のダイヤモンド切削における工具摩耗抑制-浸炭の効果-査読無その他国内共著乾 裕美子;古城 直道;樋口 誠宏;山口 智実;寺内 俊太郎;松田 茂敬ダイヤモンド工具;摩耗;超精密切削;鋼;浸炭処理2011年度精密工学会春季大会学術講演会講演論文集pp. 857-8582011年3月 14日~2011年3月 16日2011年度精密工学会春季大会学術講演会東洋大学(大震災により中止)
学会発表鉄系金属の超精密切削加工における工具損耗の抑制査読無その他国内共著土居 立典;田中 宏明;島田 尚一;樋口 誠宏;古城 直道;山口 智実2011年度精密工学会春季大会学術講演会講演論文集pp. 53-542011年3月 14日~2011年3月 16日2011年度精密工学会春季大会学術講演会東洋大学(大震災により中止)
学会発表マイクロ多刃工具の加工特性における成膜材の影響査読無その他国内共著川合 康裕;山口 智実;古城 直道;樋口 誠宏;杉本 隆史2011年度精密工学会春季大会学術講演会講演論文集pp. 223-2242011年3月 14日~2011年3月 16日2011年度精密工学会春季大会学術講演会東洋大学(大震災により中止)
国際学会Tool Wear in Diamond Turning of Steels査読無その他国内共著Naomichi FURUSHIRO;Masahiro HIGUCHI;Tomomi YAMAGUCHI;Shuntaro TERAUCHI;Shigehiro MATSUDA;Shoichi SHIMADAultraprecision cutting;diamond tool;steel;wear;metallographic structure;ultraprecision machiningProceedings of ASPE 2010 Annual Meetingpp. 431-4342010年10月 31日~2010年11月 4日25th ASPE Annual MeetingOmni Hotel at CNN Center, Atlanta, GA USAExcessive tool wear occurs when commercial steel alloys are single-point diamond turned. Consequently, the development of a diamond-turnable steel is awaited in the manufacture of molds for high-precision, complex optical components. As a preliminary investigation, various quenched and tempered steels were turned using single-crystal diamond tools, and tool wear was measured using a scanning electron microscope. Maximum wear was observed at the tool nose, and its extent varied for different steels. To clarify the reasons for this, phase analysis of the steels used in the turning experiments was performed by X-ray diffraction. This analysis revealed that the steels had considerably different microstructures that could be classified into four broad groups: α-ferrite, α-ferrite + γ-austenite, γ-austenite, and α-ferrite + carbide compounds (e.g., Fe3C, Cr23C6, and WC). On the basis of these results, we analyzed whether a causal relationship existed between the microstructure of the steel and the nose wear of the diamond tool. To ensure unbiased analysis, an inductive inference technique known as C4.5 was applied to the tool wear measurement and phase analysis results. C4.5 generated valuable classification rules in the form of a decision tree that had branches associated with the matrix phases of the steels and leaves associated with the extent of nose wear. The tree described the following two rules: steels whose microstructures consist of α-ferrite and carbide phases (e.g., JIS SK5, JIS SKS3, and JIS SUS420J2) wear the tool nose slightly, whereas steels whose microstructures consist of α-ferrite, α-ferrite + γ-austenite, or γ-austenite wear the tool nose severely. Hence, the presence of carbon compounds in the α-ferrite matrix appears to be very effective in reducing the nose wear of diamond tools. Strong confirmation of this hypothesis was obtained by investigating the diamond turnabilities of steels in which carbon atoms remain as a solid solution in the martensite phase instead of forming carbon compounds. Turning experiments revealed that steels that are supersaturated with carbon atoms (i.e., quenched JIS SK5 and JIS SUS420J2) severely wore the tool nose. Therefore, it can be concluded that the formation of small carbon-compound particles that are uniformly dispersed within a continuous α-ferrite matrix suppresses nose wear of diamond tools.
学会発表Niの加工におけるダイヤモンド工具の損耗機構査読無その他国内共著土居 立典;田中 宏明;島田 尚一;樋口 誠宏;古城 直道;山口 智実2010年度精密工学会秋季大会学術講演会講演論文集pp. 115-1162010年9月 27日~2010年9月 29日2010年度精密工学会秋季大会学術講演会名古屋大学
論文セリアを含むメカノケミカル超砥粒砥石の構造モデルの構築査読有学術雑誌国内共著山口 智実;古城 直道;樋口 誠宏;島田 尚一;松森 昇;尾倉 秀一;小田 廣和mechanochemical stone;cerium dioxide;fractal modeling;diffusion-limited aggregation algorithm;sandpile algorithm砥粒加工学会誌54 (9), pp. 557-5612010年9月 10.11420/jsat.54.557
学会発表軸受鋼の超仕上におけるメカノケミカル砥石の材料除去機構査読無その他国内共著井上 善朗;古城 直道;樋口 誠宏;山口 智実;松森 昇;尾倉 秀一mechanochemical stone;cerium dioxide abrasive;superfinishing;surface finish;bearing steel2010年度砥粒加工学会学術講演会講演論文集pp. 275-2762010年8月 26日~2010年8月 28日2010年度砥粒加工学会学術講演会岡山大学
国際学会Suppression Mechanism of Tool Wear by Phosphorous Addition in Diamond Turning of Electroless Nickel Deposits査読有その他国内共著Naomichi FURUSHIRO;Hiroaki TANAKA (Osaka Electro-Communication Univ.);Masahiro HIGUCHI;Tomomi YAMAGUCHI;Shoichi SHIMADA60th CIRP General Assembly2010年8月 22日~2010年8月 28日 60th CIRP General AssemblyPisa, Italy
論文Development of Mechanochemical Diamond Stone containing BaSO4 Abrasive査読有学術雑誌国内共著Naomichi FURUSHIRO;Masahiro HIGUCHI;Tomomi YAMAGUCHI;Takashi SUGIMOTO;Noboru MATSUMORI;Hidekazu OGURA;Shoichi SHIMADAmechanochemical superabrasive stone;barium sulfate;thermodynamic analysis;Fe3O4-rich white layer;surface integrity;wear resistancePrecision Engineering34 (3), pp. 419-4242010年7月 10.1016/j.precisioneng.2009.12.004This paper describes a newly developed mechanochemical superabrasive stone containing reactive BaSO4 abrasive. A thermodynamic analysis suggested that BaSO4 reacts with Fe forming oxides. X-ray diffraction patterns revealed that scales that cover steels heated with BaSO4 abrasive consist of Fe3O4, α-Fe and BaS. On the basis of these results, vitrified diamond stones containing BaSO4 abrasive were manufactured and the effect of the BaSO4 abrasive on their performances was evaluated through the superfinishing of bearing steels. It was found that soft BaSO4 abrasive rubs the surface of hardened steel producing smooth surfaces with valleys. The stone reduces both the hardened layer depth and the compressive residual stress in the finished surface because of the formation of a thin white layer. The addition of BaSO4 abrasive improves the wear resistance of diamond stone because the dominant wear mechanism changes from carbon diffusion to oxidization of diamond.
論文Suppression Mechanism of Tool Wear by Phosphorous Addition in Diamond Turning of Electroless Nickel Deposits査読有学術雑誌国内共著Naomichi FURUSHIRO;Hiroaki TANAKA (Osaka Electro-Communication Univ.);Masahiro HIGUCHI;Tomomi YAMAGUCHI;Shoichi SHIMADAturning;diamond;wearCIRP Annals – Manufacturing Technology59 (1), pp. 105-1082010年7月 10.1016/j.cirp.2010.03.058An appropriate phosphorous addition to electroless nickel deposits remarkably reduces tool wear in diamond turning. To understand the wear suppression mechanism of phosphorous addition, erosion tests simulating tool wear process and ab-initio molecular dynamics calculations of interactions between diamond and Ni-P and Ni are carried out. The erosion tests show that carbon diffusion into the workpiece is reduced, and the ab-initio calculations suggest that dissociation of carbon atoms on diamond surface due to the interaction with the workpiece is reduced. The results suggest that another possible additive to suppress tool wear can be found by the method proposed.
学会発表アレイ型マイクロ多刃工具のガラス加工への適用査読無その他国内共著川合 康裕;山口 智実;古城 直道;樋口 誠宏;杉本 隆史精密工学会2010年度関西地方定期学術講演会講演論文集pp. 56-572010年5月 28日精密工学会2010年度関西地方定期学術講演会京都大学
講演メカノケミカル超砥粒砥石による鋼の超仕上査読無その他国内共著古城 直道;樋口 誠宏;山口 智実第11回高エネ研メカ・ワークショプ 第2回先端加速器・機械工学・超伝導低温技術研究会報告集pp. 296-3072010年4月 8日~2010年4月 9日第11回高エネ研メカ・ワークショプ 第2回先端加速器・機械工学・超伝導低温技術研究会高エネルギー加速器研究機構
論文炭素拡散に基づくダイヤモンド工具の熱化学研磨査読有学術雑誌国内共著古城 直道;樋口 誠宏;山口 智実;杉本 隆史;島田 尚一cutting tool;diamond;polishing;thermo-chemical reaction;diffusion;tool wear日本機械学会論文集 C編76 (764) C, pp. 974-9802010年4月 10.1299/kikaic.76.974拡散実験から,Niとダイヤモンドの接触界面においてNiへ炭素が拡散することにより,ダイヤモンドが侵食されることを明らかにした.この知見を基に,炭素拡散機構によるダイヤモンドの熱化学研磨を試みたところ,拡散に伴う炭素原子の脱離は研磨面の結晶性を低下させることなく,ダイヤモンドを数nm程度除去するが,強度を低下させることがわかった.それゆえ,熱化学研磨されたダイヤモンド工具はチッピングしやすく,寿命が短いことが判明した.以上のことを総合すると,拡散機構に基づくダイヤモンドの熱化学研磨は有用でないと考えられる.
学会発表超精密切削用ダイヤモンド工具の損耗特性に対する窒素不純物の影響査読無その他国内共著土居 立典;田中 宏明;山口 智実;島田 尚一;古城 直道;樋口 誠宏2010年度精密工学会春季大会学術講演会講演論文集pp. 433-4342010年3月 16日~2010年3月 18日2010年度精密工学会春季大会学術講演会埼玉大学
学会発表単結晶ダイヤモンドのクラック伸展挙動に対する分子動力学解析査読無その他国内共著瀬戸 健太;山口 智実;古城 直道;樋口 誠宏;齋藤 賢一;島田 尚一2010年度精密工学会春季大会学術講演会講演論文集pp. 435-4362010年3月 16日~2010年3月 18日2010年度精密工学会春季大会学術講演会埼玉大学
学会発表鋼のダイヤモンド切削における工具摩耗査読無その他国内共著高橋 功奈;古城 直道;樋口 誠宏;山口 智実;杉本 隆史;寺内 俊太郎;松田 茂敬2010年度精密工学会春季大会学術講演会講演論文集pp. 17-182010年3月 16日~2010年3月 18日2010年度精密工学会春季大会学術講演会埼玉大学
論文鋼の超仕上におけるダイヤモンド砥石の摩耗抑制査読有学術雑誌国内共著古城 直道;樋口 誠宏;山口 智実;杉本 隆史;島田 尚一;寺内 俊太郎;松田 茂敬;松森 昇;尾倉 秀一ultra-precision machining;diamond stone;stone wear;diffusion;nitriding;chemical reaction;abrasive grain日本機械学会論文集 C編76 (763) C, pp. 777-7832010年3月 10.1299/kikaic.76.777鋼を超仕上すると,ダイヤモンド砥石はcBN砥石に比べて大きく摩耗し,短寿命である.そのゆえ,ダイヤモンド砥石の摩耗を抑制する方法について検討した.その一つは,BaSO4砥粒を加えたダイヤモンド砥石で超仕上する方法である.BaSO4砥粒は仕上過程で鋼表面を酸化するため,砥石の摩耗機構は酸化鉄の還元に転換される.また被削材の鋼を窒化するのも一つの方法である.窒化は鋼表面を炭素が拡散しにくい結晶構造に改質する.以上の方法の有効性を調べるため,鋼の超仕上実験を行った.その結果,ダイヤモンド砥石の損耗率は数分の一に減少し,砥石摩耗が抑制されることが明らかになった.
学会発表成膜材の違いによるマイクロ多刃工具の加工特性査読無その他国内共著清水 祐輔;山口 智実;古城 直道;樋口 誠宏;杉本 隆史第14回関西大学先端科学技術シンポジウムpp. 261-2622010年1月 28日~2010年1月 29日第14回関西大学先端科学技術シンポジウム関西大学
国際学会Mechanochemical Superfinishing of Optical Glass – Scratchless Surface Finishing Process –査読無その他国内共著Naomichi FURUSHIRO;Masahiro HIGUCHI;Tomomi YAMAGUCHI;Noboru MATSUMORI;Hidekazu OGURA;Shoichi SHIMADAoptical glass;mechanochemical superfinishing;cerium oxide superabrasive stone;scratchless surfaceProceedings of ASPE 2009 Annual Meetingpp. 323-3262009年10月 4日~2009年10月 9日24th ASPE Annual MeetingMonterey Marriott Hotel and the Monterey Conference Center Monterey, CA, USAA new process chain for effective finishing of optical glass ultra-precision surface has been developed.
One of the effective methods for obtaining ultra-precision surface is utilization of mechanochemical reaction that occurs at the interface between a tool and a workpiece.To realize such machining, new superabrasive stones have been developed, which have both chemical and mechanical actions.These new superabrasive stones differ from conventional ones.They contain cerium oxide CeO2 powder, which is softer than the workpiece but can chemically react with it, along with diamond grit.It is said that cerium oxide in contact with optical glass reacts with the glass surface.To confirm whether chemical reaction actually occurs, CeO2 stone was produced and its performance was evaluated through the superfinishing of optical glass.Experiments showed that the material removal rate of the CeO2 stone increased almost linearly and the wear rate of the CeO2 stone decreased almost linearly with an increase in the temperature of the superfinishing fluid; that is, the removal rate can be described by the Arrhenius equation.This means that CeO2 powder can also react chemically with the optical glass workpiece in the superfinishing process.The chemical action of the CeO2 powder produced good results for the surface finish.But the CeO2 stone cannot remove deep scratches produced by pre-finishing because the CeO2 powder is softer than the workpiece.To solve this problem, we optimized the pre-finishing process.A vitrified diamond stone and a vitrified diamond stone containing CeO2 powder (i.e., D stone and D/CeO2 stone) were examined through the superfinishing of optical glass.Experiments showed that the D stone was superior in removal rate and wear ratio than that of the D/CeO2 stone, and the D/CeO2 stone was superior in surface roughness and scratch depth than that of the D stone; that is, both had their strong and weak points.To optimize the pre-finishing process, simplex method was used to maximize the removal rate, which was subject to smaller scratch depth, better roughness, and smaller stone wear.
After optimization, D/CeO2 was chosen as the pre-finishing process.The D/CeO2 stone produced less scratch than the D stone and removed about the same amount of optical glass as the D stone.The results are as follows:The D/CeO2 stone produces smooth surface with less scratch, good roughness, and small stone wear, and high removal rate; that is, the D/CeO2 stone is suitable for pre-finishing.The CeO2 stone reacts with optical glass surface and produces a smooth surface with less scratch that is suitable for finishing process of reflecting mirrors.Add to these results, the total finishing time of the process is shorter than five minutes.Consequently, it is concluded that the process chain has a superior finishing performance.
国際学会3D Structure and Surface Topography Models of the Mechano-chemical Composite Grinding Wheel by Fractal Modeling Technique査読無その他国内共著Tomomi YAMAGUCHI;Masahiro HIGUCHI;Naomichi FURUSHIRO;Hirokazu ODA;Shoichi SHIMADA;Noboru MATSUMORI;Hidekazu OGURAProceedings of ASPE 2009 Annual Meetingpp. 343-3462009年10月 4日~2009年10月 9日24th ASPE Annual MeetingMonterey Marriott Hotel and the Monterey Conference Center Monterey, CA, USAOur goal is the development of the design system of the “mechano-chemical composite grinding wheel.” This wheel developed as a new composite grinding one is vitrified-bonded and compounded of super-hard abrasive grain like CBN and the “mechano-chemical” one like Cerium (IV) oxide (CeO2) replacing rouge in polishing of glass. The super finishing by the wheel has advantages of both abrasive grains. For example, the CBN-CeO2 composite wheel can realize the super finishing with higher efficiency than only CeO2 grains and lower roughness, less deformed layer and less scratch damage than only CBN grains. Clearly, however, it becomes more difficult to decide the production parameters like wheel composition, burning temperature, etc. for the composite wheel suitable for a given machining performance. Thus, in order to develop the design system, we have tried to clarify the relationship between the machining performance and the production parameters by incorporating the structure and surface topography of the composite wheel as parameter into it.This paper describes, as the first step of the development, the morphological structure model and the geometric surface model for the mechano-chemical composite grinding wheel using fractal modeling techniques. We have proposed two models to represent the conventional wheel’s structure: the “agglomerate model of a plastic mixture” representing a plastic mixture before the burning process of a wheel on the basis of the diffusion-limited aggregation algorithm and the “morphological model of a burnt wheel” representing the structure of the burnt wheel on the basis of the sandpile algorithm. In comparison with a conventional wheel, the characteristics of the composite wheel are as follows: CeO2 grains tend to agglomerate into some clusters and many grains miss being bonded to bond particles because the number of grain particles per a bond one is more. Thus, in the application of those models to the composite wheel, we have improved them by adding the following procedures: the “cluster formation” algorithm and the “judgment of a bonded grain” algorithm. On the other hand, we have also proposed the geometric modeling technique of a grinding wheel’s surface. It is based on the generating algorithms for random fractals such as midpoint displacement and successive random additions. We have constructed the geometric composite wheel’s surface model by setting parameters for each abrasive grain on the proposed geometric modeling technique. Both models were compared with the real wheels in structure and surface topography. As a result, both models bear resemblances to the real wheels in spatial and surface distributions of both grains and the average grain spacing, area percentage of grain occupation and fractal dimension in each grain of the real wheel are approximately equal to those of the models. Therefore, our models play an important role in the design of the developed composite wheels.
論文Polishing of Single Point Diamond Tool based on Thermo-Chemical Reaction with Copper査読有学術雑誌国内共著Naomichi FURUSHIRO;Masahiro HIGUCHI;Tomomi YAMAGUCHI;Shoichi SHIMADA;Kazushi OBATAthermo-chemical polishing;diamond cutting tool;fracture strength;wear rate;crack healing;tool lifePrecision Engineering33 (4), pp. 486-4912009年10月 10.1016/j.precisioneng.2009.01.004This paper describes a new polishing method for diamond cutting tools. The method is based on the principle of oxidization of copper and deoxidization of copper oxide by carbon. A diamond tool was brought into contact with a copper plate, heated in air to a range of 323–523 K. The depth of the removed layer of diamond increased almost linearly with contact time and reached approximately 7 nm after 6 h. In this erosion process, pre-existing microcracks on the diamond surface were reduced. In comparison with the mechanically polished tool, the thermo-chemically polished tool was highly resistant to chipping and yielded a significant rise in tool life.
学会発表鋼の超仕上におけるダイヤモンド砥石の摩耗抑制の試み査読無その他国内共著平嶺 雄;古城 直道;樋口 誠宏;山口 智実;松田 茂敬;土井 研児;寺内 俊太郎;松森 昇;尾倉 秀一2009年度精密工学会秋季大会学術講演会講演論文集pp. 333-3342009年9月 10日~2009年9月 12日2009年度精密工学会秋季大会学術講演会神戸大学
学会発表ダイヤモンド工具の摩耗メカニズムと摩耗形態査読無その他国内共著山地 祥隆;古城 直道;樋口 誠宏;山口 智実;島田 尚一;田中 宏明2009年度精密工学会秋季大会学術講演会講演論文集pp. 61-622009年9月 10日~2009年9月 12日2009年度精密工学会秋季大会学術講演会神戸大学
論文組立用アクティブ・フレキシブル治具の開発(第2報)―平面対応型アクティブ・フレキシブル治具を用いた組立作業―査読有学術雑誌国内共著山口 智実;古城 直道;樋口 誠宏fixture;automated assembly;peg-in-hole task;handling精密工学会誌75 (9), pp. 1134-11382009年9月 10.2493/jjspe.75.1134本研究は,汎用自動組付けに適する様々な形状の部品の能動的保持・固定機能と,保持部品の位置誤差を修正するための微小位置決め機能を併せ持つアクティブ・フレキシブル治具(AFLEF)の開発を目的とする。本報では様々な形状のワークを能動的に保持・固定できるアクティブ・フレキシブル治具の試作機である平面対応型AFLEFを用いてpeg-in-hole作業に対する作業アルゴリズムを開発した。これにより得た主な知見を次に示した。1)ワークと面接触状態か否かを検知するタッチセンサを開発し試作機に付加したこと,2)そのタッチセンサを用いて,ワークとの非面接触状態を面接触状態へ修正するアルゴリズムを開発し,挿入実験の結果,多少の時間は要するもののその有用性を確認したこと,3)ワークを保持した際の組付け位置からの位置・姿勢のずれを,視覚センサなどを使わずAFLEFのみで修正するアルゴリズムを開発したこと,4)挿入実験の結果,そのアルゴリズムの妥当性は確認できたが,角度センサの精度などの問題により,本試作機では修正精度が実用には至らないこと,5)以上から平面対応型AFLEFに,ワークの保持・固定と位置・姿勢の修正を担わせてのpeg-in-hole作業は実現可能であること。
論文セリアを含むメカノケミカル超砥粒砥石の超仕上特性査読有学術雑誌国内共著古城 直道;樋口 誠宏;山口 智実;山野 隆章;松森 昇;尾倉 秀一mechanochemical stone;cerium dioxide abrasive;superfinishing;subsurface damage;surface finish砥粒加工学会誌53 (8), pp. 499-5032009年8月 10.11420/jsat.53.499転がり軸受面の性能向上を目的に,鋼を酸化させるセリア(CeO2)砥粒をcBN砥粒とともに,ビトリファイドボンドで結合したメカノケミカル砥石を開発した.そして,本砥石の性能を軸受鋼の超仕上実験を通して評価した.その結果,加工変質層が浅く,圧縮応力の残る仕上面を生成すること,また負の歪度をもつ粗さの小さい仕上面を生成することがわかった.したがって,CeO2砥粒を含むcBN砥石は耐摩耗性,疲労強さ,耐食性,油膜形成能力に優れた軸受面を生成することが期待される.
論文Development of Ultra-Fine-Grain Binderless cBN Tool for Precision Cutting of Ferrous Materials査読有学術雑誌国内共著Kazuhiro FUJISAKI;Hideo YOKOTA;Naomichi FURUSHIRO;Yutaka YAMAGATA;Takashi TANIGUCHI;Ryutaro HIMENO;Akitake MAKINOUCHI;Toshiro HIGUCHIhigh-precision machining;cubic boron nitride;single-crystal diamond tool;mirror-like surface;ferrous materialJournal of Materials Processing Technology209 (15-16), pp. 5646-56522009年8月 10.1016/j.jmatprotec.2009.05.023A new cutting tool was developed from ultra-fine-grain (<100 nm), binderless cubic boron nitride (cBN) material fabricated by transforming hexagonal boron nitride to cBN by means of sintering under an ultra-high pressure of 10 GPa at 1800 °C. The cutting edges of the newly developed cBN tool can be made as sharp as those of single-crystal diamond tools. In this experiment, cBN and single-crystal diamond tools of the same shape were compared by precision cutting tests using stainless steel specimens and steel specimens coated with an electroless Ni-P layer. The surface roughness (Rz) of specimen surfaces cut with the cBN tool by means of planing was approximately 100 nm for both the Ni-P-coated steel and stainless steel specimens. Though similar Rz values were obtained for Ni-P layers cut by the cBN and diamond tools, an Rz value exceeding 2000 nm was obtained for stainless steel cut by the diamond tool. High-precision surfaces with Rz values of 50–100 nm were obtained for stainless steel specimens cut with the cBN tool under high-speed milling (942 m/min) conditions. These results indicate that the newly developed cBN tool is useful for the ultra-precision or precision cutting of ferrous materials.
講演メカノケミカル砥石による光学ガラスの超仕上げ査読無その他単著古城 直道;廣岡 大祐;古城 直道;山口 智実メカトロニクス基礎研究施設講演会-大型光学部品の超精密加工-2009年5月 18日メカトロニクス基礎研究施設講演会大阪電気通信大学
学会発表コーティングしたマイクロ多刃工具によるガラスの微小切削査読無その他国内共著清水 祐輔;山口 智実;古城 直道;樋口 誠宏;杉本 隆史精密工学会2009年度関西地方定期学術講演会講演論文集pp. 39-402009年3月 13日精密工学会2009年度関西地方定期学術講演会千里LSC
学会発表酸化セリウム砥石による光学ガラスの超仕上査読無その他国内共著古城 直道;平田 崇哲;樋口 誠宏;山口 智実;松森 昇;尾倉 秀一;島田 尚一2009年度精密工学会春季大会学術講演会講演論文集pp. 233-2342009年3月 11日~2009年3月 13日2009年度精密工学会春季大会学術講演会中央大学
学会発表窒化された鋼のダイヤモンド切削における工具損耗査読無その他国内共著高橋 功奈;古城 直道;樋口 誠宏;山口 智実;松田 茂敬;土井 研児;寺内 俊太郎2009年度精密工学会春季大会学術講演会講演論文集pp. 251-2522009年3月 11日~2009年3月 13日2009年度精密工学会春季大会学術講演会中央大学
学会発表分子動力学法による単結晶ダイヤモンド工具の強度の解析査読無その他国内共著瀬戸 健太;古城 直道;樋口 誠宏;山口 智実;齋藤 賢一;島田 尚一2009年度精密工学会春季大会学術講演会講演論文集pp. 337-3382009年3月 11日~2009年3月 13日2009年度精密工学会春季大会学術講演会中央大学
学会発表マイクロ加工機械用工具の性能評価査読無その他国内共著清水 祐輔;山口 智実;古城 直道;樋口 誠宏;杉本 隆史第13回関西大学先端科学技術シンポジウムpp. 221-2222009年1月 15日~2009年1月 16日第13回関西大学先端科学技術シンポジウム関西大学
論文Development of Superabrasive Stone for Mechanochemical Superfinishing査読有学術雑誌国内共著Masahiro HIGUCHI;Tomomi YAMAGUCHI;Naomichi FURUSHIRO;Takashi SUGIMOTO;Shoichi SHIMADA;Noboru MATSUMORI;Hidekazu OGURAmechanochemical superabrasive stone;cerium oxide;thermodynamic analysis;oxide layer;synergistic effect;smooth superfinished surfacePrecision Engineering33 (1), pp. 65-702009年1月 10.1016/j.precisioneng.2008.03.005One of the effective methods for obtaining an ultra-precision surface is utilization of the mechanochemical reaction that occurs at the interface between a tool and a workpiece. A thermodynamic analysis suggested that cerium oxide CeO2 in contact with steel oxidizes the steel surface. Then, steel specimens embedded in CeO2 powder were heated to 773 K in a vacuum, and their surfaces were closely analyzed by X-ray diffractometry. As a result, peaks of Fe3O4 together with α-Fe were recognized by their diffraction patterns. On the basis of this finding, vitrified superabrasive stones containing CeO2, i.e., cBN/CeO2 stones, were made and their performances were evaluated through the superfinishing of bearing steels. Experiments showed that cBN/CeO2 stone is superior in surface finish to conventional cBN stone because of the synergistic effect of the mechanical action of the cBN abrasive and chemical action of the CeO2 abrasive.
講演精密切削加工を利用した硬組織対応型3次元内部構造顕微鏡の開発査読無その他国内共著古城 直道;横田 秀夫;中村 佐紀子;藤崎 和弘;山形 豊;姫野 龍太郎;牧野内 昭武;樋口 俊郎理研シンポジウム-生体形状情報の数値化及びデータベース構築研究-pp. 12-162008年12月 18日理研シンポジウム理化学研究所
講演元素分析型3次元内部構造顕微鏡の開発査読無その他国内共著藤崎 和弘;横田 秀夫;古城 直道理研シンポジウム-生体形状情報の数値化及びデータベース構築研究-pp. 17-202008年12月 18日理研シンポジウム理化学研究所
国際学会Three-dimensional Internal Information Acquisition System based on Consecutive Precision Machining and Cross-sectional Observation – Development of the system and its Application –査読無その他国内共著Naomichi FURUSHIRO;Hideo YOKOTA;Kazuhiro FUJISAKI;Yutaka YAMAGATA;Mitsunori KOKUBO;Ryutaro HIMENO;Akitake MAKINOUCHI;Toshiro HIGUCHIprecision machining;three-dimensional information;three-dimensional internal structure;three-dimensional digitizing;casting defect;biological sampleProceedings of ASPE 2008 Annual Meetingpp. 180-1832008年10月 19日~2008年10月 24日23rd ASPE Annual Meeting and 12th ICPEPortland Marriott Downtown Waterfront Hotel Portland, Oregon, USAAn automated three-dimensional internal information acquisition system based on consecutive precision machining and high-resolution cross-sectional observation was developed. The system enabled three-dimensional analyses of casting defects in a die casting alloy specimen, and three-dimensional microstructure observation of biological samples containing hard tissues.Precise detection of internal defects inside metallic material specimens and microscopic internal structure observation of biological samples are desired. Destructive inspections provides more detailed and accurate information of specimens than nondestructive tests, though, they requires considerable time to prepare specimens, and to align cross-sectional information to reconstruct three-dimensional information. The time required for specimen preparation and three-dimensional alignment should be reduced. To achieve this, automatic and sequential high-precision cross-section generations and cross-sectional information acquisitions are needed.An automated system was developed to acquire three-dimensional information. The system is based on consecutive precision machining and cross-sectional image recording. In the system, face milling by a single crystal diamond tools is used for high precision machining, and an optical microscope is used for cross-sectional image recording.
By the system, following results were obtained. Cutting accuracy and information acquisition accuracy was tested and both of their errors, which are main cause of acquisition information errors, were below 1 μm. Surface roughness of a resin embedded aluminum specimen after cutting was approximately 100nm p-v. Two-dimensional color cross-sectional images of the specimen were consecutively recorded from top to bottom. In those images, the aluminum was distinguishable from the surrounding resin, and the resin was also distinguishable from air. The aluminum and the resin were three-dimensionally reconstructed respectively from those images, and precise three-dimensional shapes and internal structures were acquired. In addition, compared to conventional nondestructive test, the information acquired by the system includes less skews, less artifacts, and has high spatial resolution.The size and the shape of casting defects inside aluminum die casting alloy specimen, which has many casting defects inside, were also investigated by the system. Three-dimensional information of whole specimen was acquired less than 10 μm resolution. Casting defects inside the specimen were distinguishable in color cross-sectional images, and the regions of casting defects were extracted. Over 5000 individual regions of casting defects were three-dimensionally reconstructed, and those size and shapes were examined.To acquire biological samples’ internal structure like lifelike shape, hard tissues and soft tissues should not be separated before cutting. By the system, hard tissues like bones were mirror-like finished and internal structures of hard tissues were acquired. Three-dimensional internal structure of hard tissues were reconstructed and visualized by the system. In addition, three-dimensional internal structures of a frozen specimen, which contains hard tissues and soft tissues, were also acquired by the system. Both soft tissues and hard tissues of the specimen were three-dimensionally visualized.
国際学会Mechanochemical Diamond Stone Containing BaSO4 Abrasive査読無その他国内共著Masahiro HIGUCHI;Naomichi FURUSHIRO;Tomomi YAMAGUCHI;Takashi SUGIMOTO;Noboru MATSUMORI;Hidekazu OGURA;Shoichi SHIMADAProceedings of ASPE 2008 Annual Meetingpp. 392-3952008年10月 19日~2008年10月 24日23rd ASPE Annual Meeting and 12th ICPEPortland Marriott Downtown Waterfront Hotel Portland, Oregon, USAInterfacial reaction machining is an effective method for achieving high surface accuracy, good surface finish, and low subsurface damage. To realize such machining, a new superabrasive stone has been developed, which has both chemical and mechanical actions. This new superabrasive stone differs from conventional ones. It contains barium sulfate BaSO4 powder, which is softer than the workpiece but can chemically react with it, along with diamond grit.
According to the thermodynamic analysis, when BaSO4 is in contact with steel, it oxidizes the steel surface. To confirm whether this chemical reaction actually occurs, steel specimens embedded in BaSO4 powder were heated in a vacuum, and their surfaces were closely analyzed by X-ray diffractometry. Peaks of Fe3O4 together with -Fe were observed in their diffraction patterns. Therefore, the derived reaction can be represented by the following chemical equation:BaSO4 + 3Fe → Fe3O4 + BaSOn the basis of this finding, a vitrified diamond stone containing BaSO4 powder (i.e., D/BaSO4 stone) was produced and its performance was evaluated through the superfinishing of bearing steels. Experiments showed that the material removal rate of the D/BaSO4 stone increased almost linearly with an increase in the temperature of the superfinishing fluid; that is, the removal rate can be described by the Arrhenius equation. This means that BaSO4 powder can also react chemically with the steel workpiece in the superfinishing process. The chemical action of the BaSO4 powder yielded the following good results for the surface finish.First, the D/BaSO4 stone produced a smooth surface with negative skewness that is suitable for bearing races. Second, the D/BaSO4 stone reduced both the hardened layer depth and the compressive residual stress in the finished surfaces. Finally, the finishing ratio of the D/BaSO4 stone was five times larger than that of conventional diamond stone because of its high resistance to wear. Consequently, it is concluded that the D/BaSO4 stone has a superior finishing performance than that of diamond stone.
学会発表合成ダイヤモンド工具の耐摩耗性の評価査読無その他国内共著高橋 功奈;古城 直道;樋口 誠宏;山口 智実;島田 尚一;吉永 実樹2008年度精密工学会秋季大会学術講演会講演論文集pp. 45-462008年9月 17日~2008年9月 19日2008年度精密工学会秋季大会学術講演会東北大学
学会発表単結晶ダイヤモンド切削工具の損耗機構査読無その他国内共著高井 俊平;島田 尚一;樋口 誠宏;山口 智実;古城 直道;吉永 実樹2008年度精密工学会秋季大会学術講演会講演論文集pp. 801-8022008年9月 17日~2008年9月 19日2008年度精密工学会秋季大会学術講演会東北大学
学会発表ダイヤモンド超砥粒砥石によるガラスの超仕上げに対する特性評価査読無その他国内共著山口 智実;平田 崇哲;古城 直道;樋口 誠宏;松森 昇;尾倉 秀一;近藤 儀三郎2008年度砥粒加工学会学術講演会講演論文集pp. 15-202008年9月 3日~2008年9月 5日ABTEC2008滋賀県立大学
論文試料内部3次元情報取得システムによるアルミニウム合金ダイカスト内部の鋳巣観察査読有学術雑誌国内共著古城 直道;横田 秀夫;藤崎 和弘;山形 豊;小久保 光典;姫野 龍太郎;牧野内 昭武;樋口 俊郎high precision machining;three-dimensional internal structure;casting defect;shrinkage cavity;micro porosity;void;aluminum casting alloy;ADC12精密工学会誌74 (9), pp. 991-9962008年9月 10.2493/jjspe.74.991Casting defects in die casting materials are known as starting points of fatigue fractures. Therefore investigating their presence, sizes, and distributions are important for lifetime predictions of casting materials. In this paper, the size and the shape of casting defects inside aluminum die casting alloy were investigated by an automated three-dimensional information acquisition system based on consecutive precision milling and cross-sectional image recording. The main results obtained are as follows: (1) Two-dimensional color cross-sectional images were consecutively recorded in 4×4×5μm resolution for 20×14×20mm aluminum die casting specimen. (2) Casting defects were distinguishable in those images, and the regions of casting defects were extracted, and over 5000 individual regions were three-dimensionally reconstructed. (3) 90% of those regions were near sphere and relatively small in diameter (<100μm).
学会発表Taをコーティングしたマイクロ多刃工具によるガラスの湿式加工査読無その他国内共著清水 祐輔;山口 智実;古城 直道;樋口 誠宏;杉本 隆史精密工学会2008年度関西地方定期学術講演会講演論文集pp. 45-462008年7月 29日~2008年7月 30日精密工学会2008年度関西地方定期学術講演会堺市産業振興センター
論文逐次精密切削加工による試料内部3次元情報取得システムの開発査読有学術雑誌国内共著古城 直道;横田 秀夫;藤崎 和弘;山形 豊;小久保 光典;姫野 龍太郎;牧野内 昭武;樋口 俊郎precision machining;single crystal diamond;cross-sectional image;three-dimensional information;computer-aided test;automated acquisition system;three-dimensional internal structure精密工学会誌74 (6), pp. 587-5922008年6月 10.2493/jjspe.74.587Recent advances in computer-aided engineering technologies need more accurate modelings techniques of three-dimensional shapes, internal structures of manufactures. In this paper, an automated system was newly developed to acquire the three-dimensional information. The system is based on consecutive precision machining and cross-sectional image recording. In the system, face milling by a single crystal diamond tool is used for high precision machining, and an optical microscope is used for cross-sectional image recording. By the system, following results were obtained: (1) Surface roughness of a resin embedded aluminum specimen was approximately 100nm p-v. (2) Two-dimensional color cross-sectional images of the specimen were consecutively recorded from top to bottom. (3) The aluminum was distinguishable from the surrounding resin in those images, and the resin was also distinguishable from air. (4) The aluminum and the resin were three-dimensionally reconstructed respectively from those images, and precise three-dimensional shapes and internal structures were acquired.
教育業績
- 2024年度
- 1.教育内容・方法の工夫(授業評価等を含む)
機械製作法 工作実習 機械加工学 生産システム工学 超精密加工学 M特殊加工学特論 適宜、演習問題を課し、講義内容の理解を深めさせている。 早期特別研究 特別研究1/2 M機械工学ゼミナール1/2/3/4 隔週で研究報告会を実施し、研究指導を行っている。 - 2.作成した教科書、教材、参考書
特になし - 3.教育方法・教育実践に関する発表、講演等
特になし - 4.その他教育活動上特記すべき事項
特になし
海外での国際会議・学会への出席歴
- 2008 American Society for Precision Engineering Annual Meeting 2008年10月 19日~2008年10月 24日発表あり
- 2009 American Society for Precision Engineering Annual Meeting 2009年10月 4日~2009年10月 9日発表あり
- 2010 American Society for Precision Engineering Annual Meeting 2010年10月 31日~2010年11月 4日発表あり
- 60th CIRP General Assembly 2010年8月 22日~2010年8月 28日発表あり
- 2011 American Society for Precision Engineering Annual Meeting 2011年11月 13日~2011年11月 18日発表あり
- 2012 American Society for Precision Engineering Annual Meeting 2012年10月 21日~2012年10月 26日発表あり
- 2013 American Society for Precision Engineering Annual Meeting 2013年10月 20日~2013年10月 25日発表あり
- 2014 euspen International Conference 2014年6月 2日~2014年6月 6日発表あり
- 2014 American Society for Precision Engineering Annual Meeting 2014年11月 9日~2014年11月 14日発表あり
- 2016 American Society for Precision Engineering Annual Meeting 2016年10月 23日~2016年10月 28日発表あり
- 2017 euspen International Conference 2017年5月 29日~2017年6月 2日発表あり
- 2018 American Society for Precision Engineering Annual Meeting 2018年11月 4日~2018年11月 8日発表あり